web-dev-qa-db-ja.com

Ubuntuの無人インストールLVMの確認

Ubuntu(12.04.3)の現在のLTSを展開するための無人インストールisoセットアップの取得に取り組んでいますが、LVMへの変更を確認するよう求めていることを除いて、すべてが思い通りに機能しています。私のインストールはすべて新しいVM上にあるため、ドライブには何も上書きされません。

パーティショニング用のpreseedファイルのセクションは次のとおりです。

## Partitioning example
# If the system has free space you can choose to only partition that space.
# This is only honoured if partman-auto/method (below) is not set.
# Alternatives: custom, some_device, some_device_crypto, some_device_lvm.
#d-i partman-auto/init_automatically_partition select biggest_free

# Alternatively, you may specify a disk to partition. If the system has only
# one disk the installer will default to using that, but otherwise the device
# name must be given in traditional, non-devfs format (so e.g. /dev/hda or
# /dev/sda, and not e.g. /dev/discs/disc0/disc).
# For example, to use the first SCSI/SATA hard disk:
#d-i partman-auto/disk string /dev/sda
# In addition, you'll need to specify the method to use.
# The presently available methods are:
# - regular: use the usual partition types for your architecture
# - lvm:     use LVM to partition the disk
# - crypto:  use LVM within an encrypted partition
d-i partman-auto/method string lvm

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

# For LVM partitioning, you can select how much of the volume group to use
# for logical volumes.
d-i partman-auto-lvm/guided_size string max
#d-i partman-auto-lvm/guided_size string 10GB
#d-i partman-auto-lvm/guided_size string 50%

# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home:   separate /home partition
# - multi:  separate /home, /usr, /var, and /tmp partitions
d-i partman-auto/choose_recipe select atomic

# Or provide a recipe of your own...
# If you have a way to get a recipe file into the d-i environment, you can
# just point at it.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# If not, you can put an entire recipe into the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
#d-i partman-auto/expert_recipe string                         \
#      boot-root ::                                            \
#              40 50 100 ext3                                  \
#                      $primary{ } $bootable{ }                \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ /boot }                     \
#              .                                               \
#              500 10000 1000000000 ext3                       \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ / }                         \
#              .                                               \
#              64 512 300% linux-swap                          \
#                      method{ swap } format{ }                \
#              .

# If you just want to change the default filesystem from ext3 to something
# else, you can do that without providing a full recipe.
#d-i partman/default_filesystem string ext4

# This makes partman automatically partition without confirmation.
d-i partman-md/confirm boolean true
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true

## Controlling how partitions are mounted
# The default is to mount by UUID, but you can also choose "traditional" to
# use traditional device names, or "label" to try filesystem labels before
# falling back to UUIDs.
#d-i partman/mount_style select uuid

ここで私のpreseedファイル全体を見つけることができます: https://Gist.github.com/Rockstar04/7492426 問題がこのセクションの外にあると思われる場合

研究:

4
Rockstar04

私のpreseed(LVMを使用)にあるすべての確認エントリは次のとおりです。

d-i partman/confirm_write_new_label     boolean true
d-i partman/choose_partition            select  finish
d-i partman/confirm_nooverwrite         boolean true
d-i partman/confirm                     boolean true
d-i partman-auto/purge_lvm_from_device  boolean true
d-i partman-lvm/device_remove_lvm       boolean true
d-i partman-lvm/confirm                 boolean true
d-i partman-lvm/confirm_nooverwrite     boolean true
d-i partman-auto-lvm/no_boot            boolean true
d-i partman-md/device_remove_md         boolean true
d-i partman-md/confirm                  boolean true
d-i partman-md/confirm_nooverwrite      boolean true

これは、すべてのパーティション設定ダイアログを確認するために必要なものよりも大きいはずです。

持っているものの外観から、d-i partman-md/confirm_nooverwrite boolean trueまたはd-i partman-md/confirm_nooverwrite boolean trueエントリ(あるいはその両方)が欠落している可能性があります。あなたがしようとせずにあなたのケースで言うことができなかった。

1
Dave