手描きの曲線を滑らかにする
ユーザーが曲線を描くことができるプログラムがあります。しかし、これらの曲線は見栄えがよくありません。ぐらついた手描きのように見えます。
したがって、それらを自動的に平滑化するアルゴリズムが必要です。平滑化プロセスには固有のあいまいさが存在することを知っているので、毎回完璧になるわけではありませんが、そのようなアルゴリズムはいくつかの描画パッケージに存在するようで、非常にうまく機能します。
このようなもののコードサンプルはありますか？ C＃は完璧ですが、他の言語から翻訳することもできます。
Ramer–Douglas–Peuckerアルゴリズム C＃実装があります ここ を使用して、ポイントの数を減らすことができます。これをWPFPolyQuadraticBezierSegmentを使用して試してみましたが、許容誤差に応じてわずかな改善が見られました。
ソースを少し検索した後（ 1 、 2 ）は、Philip J Schneiderによる Graphic Gems のカーブフィッティングアルゴリズムを使用するとうまく機能することを示しているようです。 、 Cコードが利用可能です 。 Geometric Tools また、調査する価値のあるリソースがいくつかあります。
これは大まかな サンプル 私が作成しました。まだいくつかの不具合がありますが、多くの場合うまく機能します。これがFitCurves.cのquick and dirtyC＃ポートです。問題の1つは、元のポイントを削減しない場合、計算されたエラーが0であり、サンプルが事前にポイント削減アルゴリズムを使用して早期に終了することです。
/*
An Algorithm for Automatically Fitting Digitized Curves
by Philip J. Schneider
from "Graphics Gems", Academic Press, 1990
*/
public static class FitCurves
{
/* Fit the Bezier curves */
private const int MAXPOINTS = 10000;
public static List<Point> FitCurve(Point[] d, double error)
{
Vector tHat1, tHat2; /* Unit tangent vectors at endpoints */
tHat1 = ComputeLeftTangent(d, 0);
tHat2 = ComputeRightTangent(d, d.Length - 1);
List<Point> result = new List<Point>();
FitCubic(d, 0, d.Length - 1, tHat1, tHat2, error,result);
return result;
}
private static void FitCubic(Point[] d, int first, int last, Vector tHat1, Vector tHat2, double error,List<Point> result)
{
Point[] bezCurve; /*Control points of fitted Bezier curve*/
double[] u; /* Parameter values for point */
double[] uPrime; /* Improved parameter values */
double maxError; /* Maximum fitting error */
int splitPoint; /* Point to split point set at */
int nPts; /* Number of points in subset */
double iterationError; /*Error below which you try iterating */
int maxIterations = 4; /* Max times to try iterating */
Vector tHatCenter; /* Unit tangent vector at splitPoint */
int i;
iterationError = error * error;
nPts = last - first + 1;
/* Use heuristic if region only has two points in it */
if(nPts == 2)
{
double dist = (d[first]-d[last]).Length / 3.0;
bezCurve = new Point[4];
bezCurve[0] = d[first];
bezCurve[3] = d[last];
bezCurve[1] = (tHat1 * dist) + bezCurve[0];
bezCurve[2] = (tHat2 * dist) + bezCurve[3];
result.Add(bezCurve[1]);
result.Add(bezCurve[2]);
result.Add(bezCurve[3]);
return;
}
/* Parameterize points, and attempt to fit curve */
u = ChordLengthParameterize(d, first, last);
bezCurve = GenerateBezier(d, first, last, u, tHat1, tHat2);
/* Find max deviation of points to fitted curve */
maxError = ComputeMaxError(d, first, last, bezCurve, u,out splitPoint);
if(maxError < error)
{
result.Add(bezCurve[1]);
result.Add(bezCurve[2]);
result.Add(bezCurve[3]);
return;
}
/* If error not too large, try some reparameterization */
/* and iteration */
if(maxError < iterationError)
{
for(i = 0; i < maxIterations; i++)
{
uPrime = Reparameterize(d, first, last, u, bezCurve);
bezCurve = GenerateBezier(d, first, last, uPrime, tHat1, tHat2);
maxError = ComputeMaxError(d, first, last,
bezCurve, uPrime,out splitPoint);
if(maxError < error)
{
result.Add(bezCurve[1]);
result.Add(bezCurve[2]);
result.Add(bezCurve[3]);
return;
}
u = uPrime;
}
}
/* Fitting failed -- split at max error point and fit recursively */
tHatCenter = ComputeCenterTangent(d, splitPoint);
FitCubic(d, first, splitPoint, tHat1, tHatCenter, error,result);
tHatCenter.Negate();
FitCubic(d, splitPoint, last, tHatCenter, tHat2, error,result);
}
static Point[] GenerateBezier(Point[] d, int first, int last, double[] uPrime, Vector tHat1, Vector tHat2)
{
int i;
Vector[,] A = new Vector[MAXPOINTS,2];/* Precomputed rhs for eqn */
int nPts; /* Number of pts in sub-curve */
double[,] C = new double[2,2]; /* Matrix C */
double[] X = new double[2]; /* Matrix X */
double det_C0_C1, /* Determinants of matrices */
det_C0_X,
det_X_C1;
double alpha_l, /* Alpha values, left and right */
alpha_r;
Vector tmp; /* Utility variable */
Point[] bezCurve = new Point[4]; /* RETURN bezier curve ctl pts */
nPts = last - first + 1;
/* Compute the A's */
for (i = 0; i < nPts; i++) {
Vector v1, v2;
v1 = tHat1;
v2 = tHat2;
v1 *= B1(uPrime[i]);
v2 *= B2(uPrime[i]);
A[i,0] = v1;
A[i,1] = v2;
}
/* Create the C and X matrices */
C[0,0] = 0.0;
C[0,1] = 0.0;
C[1,0] = 0.0;
C[1,1] = 0.0;
X[0] = 0.0;
X[1] = 0.0;
for (i = 0; i < nPts; i++) {
C[0,0] += V2Dot(A[i,0], A[i,0]);
C[0,1] += V2Dot(A[i,0], A[i,1]);
/* C[1][0] += V2Dot(&A[i][0], &A[i][9]);*/
C[1,0] = C[0,1];
C[1,1] += V2Dot(A[i,1], A[i,1]);
tmp = ((Vector)d[first + i] -
(
((Vector)d[first] * B0(uPrime[i])) +
(
((Vector)d[first] * B1(uPrime[i])) +
(
((Vector)d[last] * B2(uPrime[i])) +
((Vector)d[last] * B3(uPrime[i]))))));
X[0] += V2Dot(A[i,0], tmp);
X[1] += V2Dot(A[i,1], tmp);
}
/* Compute the determinants of C and X */
det_C0_C1 = C[0,0] * C[1,1] - C[1,0] * C[0,1];
det_C0_X = C[0,0] * X[1] - C[1,0] * X[0];
det_X_C1 = X[0] * C[1,1] - X[1] * C[0,1];
/* Finally, derive alpha values */
alpha_l = (det_C0_C1 == 0) ? 0.0 : det_X_C1 / det_C0_C1;
alpha_r = (det_C0_C1 == 0) ? 0.0 : det_C0_X / det_C0_C1;
/* If alpha negative, use the Wu/Barsky heuristic (see text) */
/* (if alpha is 0, you get coincident control points that lead to
* divide by zero in any subsequent NewtonRaphsonRootFind() call. */
double segLength = (d[first] - d[last]).Length;
double epsilon = 1.0e-6 * segLength;
if (alpha_l < epsilon || alpha_r < epsilon)
{
/* fall back on standard (probably inaccurate) formula, and subdivide further if needed. */
double dist = segLength / 3.0;
bezCurve[0] = d[first];
bezCurve[3] = d[last];
bezCurve[1] = (tHat1 * dist) + bezCurve[0];
bezCurve[2] = (tHat2 * dist) + bezCurve[3];
return (bezCurve);
}
/* First and last control points of the Bezier curve are */
/* positioned exactly at the first and last data points */
/* Control points 1 and 2 are positioned an alpha distance out */
/* on the tangent vectors, left and right, respectively */
bezCurve[0] = d[first];
bezCurve[3] = d[last];
bezCurve[1] = (tHat1 * alpha_l) + bezCurve[0];
bezCurve[2] = (tHat2 * alpha_r) + bezCurve[3];
return (bezCurve);
}
/*
* Reparameterize:
* Given set of points and their parameterization, try to find
* a better parameterization.
*
*/
static double[] Reparameterize(Point[] d,int first,int last,double[] u,Point[] bezCurve)
{
int nPts = last-first+1;
int i;
double[] uPrime = new double[nPts]; /* New parameter values */
for (i = first; i <= last; i++) {
uPrime[i-first] = NewtonRaphsonRootFind(bezCurve, d[i], u[i-first]);
}
return uPrime;
}
/*
* NewtonRaphsonRootFind :
* Use Newton-Raphson iteration to find better root.
*/
static double NewtonRaphsonRootFind(Point[] Q,Point P,double u)
{
double numerator, denominator;
Point[] Q1 = new Point[3], Q2 = new Point[2]; /* Q' and Q'' */
Point Q_u, Q1_u, Q2_u; /*u evaluated at Q, Q', & Q'' */
double uPrime; /* Improved u */
int i;
/* Compute Q(u) */
Q_u = BezierII(3, Q, u);
/* Generate control vertices for Q' */
for (i = 0; i <= 2; i++) {
Q1[i].X = (Q[i+1].X - Q[i].X) * 3.0;
Q1[i].Y = (Q[i+1].Y - Q[i].Y) * 3.0;
}
/* Generate control vertices for Q'' */
for (i = 0; i <= 1; i++) {
Q2[i].X = (Q1[i+1].X - Q1[i].X) * 2.0;
Q2[i].Y = (Q1[i+1].Y - Q1[i].Y) * 2.0;
}
/* Compute Q'(u) and Q''(u) */
Q1_u = BezierII(2, Q1, u);
Q2_u = BezierII(1, Q2, u);
/* Compute f(u)/f'(u) */
numerator = (Q_u.X - P.X) * (Q1_u.X) + (Q_u.Y - P.Y) * (Q1_u.Y);
denominator = (Q1_u.X) * (Q1_u.X) + (Q1_u.Y) * (Q1_u.Y) +
(Q_u.X - P.X) * (Q2_u.X) + (Q_u.Y - P.Y) * (Q2_u.Y);
if (denominator == 0.0f) return u;
/* u = u - f(u)/f'(u) */
uPrime = u - (numerator/denominator);
return (uPrime);
}
/*
* Bezier :
* Evaluate a Bezier curve at a particular parameter value
*
*/
static Point BezierII(int degree,Point[] V,double t)
{
int i, j;
Point Q; /* Point on curve at parameter t */
Point[] Vtemp; /* Local copy of control points */
/* Copy array */
Vtemp = new Point[degree+1];
for (i = 0; i <= degree; i++) {
Vtemp[i] = V[i];
}
/* Triangle computation */
for (i = 1; i <= degree; i++) {
for (j = 0; j <= degree-i; j++) {
Vtemp[j].X = (1.0 - t) * Vtemp[j].X + t * Vtemp[j+1].X;
Vtemp[j].Y = (1.0 - t) * Vtemp[j].Y + t * Vtemp[j+1].Y;
}
}
Q = Vtemp[0];
return Q;
}
/*
* B0, B1, B2, B3 :
* Bezier multipliers
*/
static double B0(double u)
{
double tmp = 1.0 - u;
return (tmp * tmp * tmp);
}
static double B1(double u)
{
double tmp = 1.0 - u;
return (3 * u * (tmp * tmp));
}
static double B2(double u)
{
double tmp = 1.0 - u;
return (3 * u * u * tmp);
}
static double B3(double u)
{
return (u * u * u);
}
/*
* ComputeLeftTangent, ComputeRightTangent, ComputeCenterTangent :
*Approximate unit tangents at endpoints and "center" of digitized curve
*/
static Vector ComputeLeftTangent(Point[] d,int end)
{
Vector tHat1;
tHat1 = d[end+1]- d[end];
tHat1.Normalize();
return tHat1;
}
static Vector ComputeRightTangent(Point[] d,int end)
{
Vector tHat2;
tHat2 = d[end-1] - d[end];
tHat2.Normalize();
return tHat2;
}
static Vector ComputeCenterTangent(Point[] d,int center)
{
Vector V1, V2, tHatCenter = new Vector();
V1 = d[center-1] - d[center];
V2 = d[center] - d[center+1];
tHatCenter.X = (V1.X + V2.X)/2.0;
tHatCenter.Y = (V1.Y + V2.Y)/2.0;
tHatCenter.Normalize();
return tHatCenter;
}
/*
* ChordLengthParameterize :
* Assign parameter values to digitized points
* using relative distances between points.
*/
static double[] ChordLengthParameterize(Point[] d,int first,int last)
{
int i;
double[] u = new double[last-first+1]; /* Parameterization */
u[0] = 0.0;
for (i = first+1; i <= last; i++) {
u[i-first] = u[i-first-1] + (d[i-1] - d[i]).Length;
}
for (i = first + 1; i <= last; i++) {
u[i-first] = u[i-first] / u[last-first];
}
return u;
}
/*
* ComputeMaxError :
* Find the maximum squared distance of digitized points
* to fitted curve.
*/
static double ComputeMaxError(Point[] d,int first,int last,Point[] bezCurve,double[] u,out int splitPoint)
{
int i;
double maxDist; /* Maximum error */
double dist; /* Current error */
Point P; /* Point on curve */
Vector v; /* Vector from point to curve */
splitPoint = (last - first + 1)/2;
maxDist = 0.0;
for (i = first + 1; i < last; i++) {
P = BezierII(3, bezCurve, u[i-first]);
v = P - d[i];
dist = v.LengthSquared;
if (dist >= maxDist) {
maxDist = dist;
splitPoint = i;
}
}
return maxDist;
}
private static double V2Dot(Vector a,Vector b)
{
return((a.X*b.X)+(a.Y*b.Y));
}
}
Krisの答えは、オリジナルのC＃への非常に優れた移植ですが、パフォーマンスは理想的ではなく、浮動小数点の不安定性が問題を引き起こし、NaN値を返す可能性がある場所がいくつかあります（これはオリジナルのコードにも当てはまります）。独自のポートとRamer-Douglas-Peukerを含むライブラリを作成しました。これは、WPFポイントだけでなく、新しいSIMD対応のベクタータイプとUnity3Dでも機能するはずです。
たぶん、このWPF + Bezierベースの記事は良いスタートです： Bezierプリミティブを使用して2Dポイントのセットを介して滑らかな曲線を描く
さて、クリスの仕事はとても役に立ちました。
誤って計算されたエラーが0で終わるためにアルゴリズムが早く終了することについて彼が指摘した問題は、1つのポイントが繰り返され、計算された接線が無限大であるという事実に起因することに気付きました。
Krisのコードに基づいてJavaに翻訳しましたが、正常に機能すると思います。
編集：
私はまだ作業を続けており、アルゴリズムの動作を改善しようとしています。非常にとがった角度では、ベジェ曲線は単にうまく動作しないことに気づきました。そこで、ベジェ曲線と線を組み合わせようとしましたが、これが結果です。
import Java.awt.Point;
import Java.awt.Shape;
import Java.awt.geom.CubicCurve2D;
import Java.awt.geom.Line2D;
import Java.awt.geom.Point2D;
import Java.util.LinkedList;
import Java.util.List;
import Java.util.concurrent.atomic.AtomicInteger;
import javax.vecmath.Point2d;
import javax.vecmath.Tuple2d;
import javax.vecmath.Vector2d;
/*
An Algorithm for Automatically Fitting Digitized Curves
by Philip J. Schneider
from "Graphics Gems", Academic Press, 1990
*/
public class FitCurves
{
/* Fit the Bezier curves */
private final static int MAXPOINTS = 10000;
private final static double epsilon = 1.0e-6;
/**
* Rubén:
* This is the sensitivity. When it is 1, it will create a line if it is at least as long as the
* distance from the previous control point.
* When it is greater, it will create less lines, and when it is lower, more lines.
* This is based on the previous control point since I believe it is a good indicator of the curvature
* where it is coming from, and we don't want long and second derived constant curves to be modeled with
* many lines.
*/
private static final double lineSensitivity=0.75;
public interface ResultCurve {
public Point2D getStart();
public Point2D getEnd();
public Shape getShape();
}
public static class BezierCurve implements ResultCurve {
public Point start;
public Point end;
public Point ctrl1;
public Point ctrl2;
public BezierCurve(Point2D start, Point2D ctrl1, Point2D ctrl2, Point2D end) {
this.start=new Point((int)Math.round(start.getX()), (int)Math.round(start.getY()));
this.end=new Point((int)Math.round(end.getX()), (int)Math.round(end.getY()));
this.ctrl1=new Point((int)Math.round(ctrl1.getX()), (int)Math.round(ctrl1.getY()));
this.ctrl2=new Point((int)Math.round(ctrl2.getX()), (int)Math.round(ctrl2.getY()));
if(this.ctrl1.x<=1 || this.ctrl1.y<=1) {
throw new IllegalStateException("ctrl1 invalid");
}
if(this.ctrl2.x<=1 || this.ctrl2.y<=1) {
throw new IllegalStateException("ctrl2 invalid");
}
}
public Shape getShape() {
return new CubicCurve2D.Float(start.x, start.y, ctrl1.x, ctrl1.y, ctrl2.x, ctrl2.y, end.x, end.y);
}
public Point getStart() {
return start;
}
public Point getEnd() {
return end;
}
}
public static class CurveSegment implements ResultCurve {
Point2D start;
Point2D end;
public CurveSegment(Point2D startP, Point2D endP) {
this.start=startP;
this.end=endP;
}
public Shape getShape() {
return new Line2D.Float(start, end);
}
public Point2D getStart() {
return start;
}
public Point2D getEnd() {
return end;
}
}
public static List<ResultCurve> FitCurve(double[][] points, double error) {
Point[] allPoints=new Point[points.length];
for(int i=0; i < points.length; i++) {
allPoints[i]=new Point((int) Math.round(points[i][0]), (int) Math.round(points[i][1]));
}
return FitCurve(allPoints, error);
}
public static List<ResultCurve> FitCurve(Point[] d, double error)
{
Vector2d tHat1, tHat2; /* Unit tangent vectors at endpoints */
int first=0;
int last=d.length-1;
tHat1 = ComputeLeftTangent(d, first);
tHat2 = ComputeRightTangent(d, last);
List<ResultCurve> result = new LinkedList<ResultCurve>();
FitCubic(d, first, last, tHat1, tHat2, error, result);
return result;
}
private static void FitCubic(Point[] d, int first, int last, Vector2d tHat1, Vector2d tHat2, double error, List<ResultCurve> result)
{
PointE[] bezCurve; /*Control points of fitted Bezier curve*/
double[] u; /* Parameter values for point */
double[] uPrime; /* Improved parameter values */
double maxError; /* Maximum fitting error */
int nPts; /* Number of points in subset */
double iterationError; /*Error below which you try iterating */
int maxIterations = 4; /* Max times to try iterating */
Vector2d tHatCenter; /* Unit tangent vector at splitPoint */
int i;
double errorOnLine=error;
iterationError = error * error;
nPts = last - first + 1;
AtomicInteger outputSplitPoint=new AtomicInteger();
/**
* Rubén: Here we try to fit the form with a line, and we mark the split point if we find any line with a minimum length
*/
/*
* the minimum distance for a length (so we don't create a very small line, when it could be slightly modeled with the previous Bezier,
* will be proportional to the distance of the previous control point of the last Bezier.
*/
BezierCurve res=null;
for(i=result.size()-1; i >0; i--) {
ResultCurve thisCurve=result.get(i);
if(thisCurve instanceof BezierCurve) {
res=(BezierCurve)thisCurve;
break;
}
}
Line seg=new Line(d[first], d[last]);
int nAcceptableTogether=0;
int startPoint=-1;
int splitPointTmp=-1;
if(Double.isInfinite(seg.getGradient())) {
for (i = first; i <= last; i++) {
double dist=Math.abs(d[i].x-d[first].x);
if(dist<errorOnLine) {
nAcceptableTogether++;
if(startPoint==-1) startPoint=i;
} else {
if(startPoint!=-1) {
double minLineLength=Double.POSITIVE_INFINITY;
if(res!=null) {
minLineLength=lineSensitivity * res.ctrl2.distance(d[startPoint]);
}
double thisFromStart=d[startPoint].distance(d[i]);
if(thisFromStart >= minLineLength) {
splitPointTmp=i;
startPoint=-1;
break;
}
}
nAcceptableTogether=0;
startPoint=-1;
}
}
} else {
//looking for the max squared error
for (i = first; i <= last; i++) {
Point thisPoint=d[i];
Point2D calculatedP=seg.getByX(thisPoint.getX());
double dist=thisPoint.distance(calculatedP);
if(dist<errorOnLine) {
nAcceptableTogether++;
if(startPoint==-1) startPoint=i;
} else {
if(startPoint!=-1) {
double thisFromStart=d[startPoint].distance(thisPoint);
double minLineLength=Double.POSITIVE_INFINITY;
if(res!=null) {
minLineLength=lineSensitivity * res.ctrl2.distance(d[startPoint]);
}
if(thisFromStart >= minLineLength) {
splitPointTmp=i;
startPoint=-1;
break;
}
}
nAcceptableTogether=0;
startPoint=-1;
}
}
}
if(startPoint!=-1) {
double minLineLength=Double.POSITIVE_INFINITY;
if(res!=null) {
minLineLength=lineSensitivity * res.ctrl2.distance(d[startPoint]);
}
if(d[startPoint].distance(d[last]) >= minLineLength) {
splitPointTmp=startPoint;
startPoint=-1;
} else {
nAcceptableTogether=0;
}
}
outputSplitPoint.set(splitPointTmp);
if(nAcceptableTogether==(last-first+1)) {
//This is a line!
System.out.println("line, length: " + d[first].distance(d[last]));
result.add(new CurveSegment(d[first], d[last]));
return;
}
/*********************** END of the Line approach, lets try the normal algorithm *******************************************/
if(splitPointTmp < 0) {
if(nPts == 2) {
double dist = d[first].distance(d[last]) / 3.0; //sqrt((last.x-first.x)^2 + (last.y-first.y)^2) / 3.0
bezCurve = new PointE[4];
bezCurve[0] = new PointE(d[first]);
bezCurve[3] = new PointE(d[last]);
bezCurve[1]=new PointE(tHat1).scaleAdd(dist, bezCurve[0]); //V2Add(&bezCurve[0], V2Scale(&tHat1, dist), &bezCurve[1]);
bezCurve[2]=new PointE(tHat2).scaleAdd(dist, bezCurve[3]); //V2Add(&bezCurve[3], V2Scale(&tHat2, dist), &bezCurve[2]);
result.add(new BezierCurve(bezCurve[0],bezCurve[1],bezCurve[2],bezCurve[3]));
return;
}
/* Parameterize points, and attempt to fit curve */
u = ChordLengthParameterize(d, first, last);
bezCurve = GenerateBezier(d, first, last, u, tHat1, tHat2);
/* Find max deviation of points to fitted curve */
maxError = ComputeMaxError(d, first, last, bezCurve, u, outputSplitPoint);
if(maxError < error) {
result.add(new BezierCurve(bezCurve[0],bezCurve[1],bezCurve[2],bezCurve[3]));
return;
}
/* If error not too large, try some reparameterization */
/* and iteration */
if(maxError < iterationError)
{
for(i = 0; i < maxIterations; i++) {
uPrime = Reparameterize(d, first, last, u, bezCurve);
bezCurve = GenerateBezier(d, first, last, uPrime, tHat1, tHat2);
maxError = ComputeMaxError(d, first, last, bezCurve, uPrime, outputSplitPoint);
if(maxError < error) {
result.add(new BezierCurve(bezCurve[0],bezCurve[1],bezCurve[2],bezCurve[3]));
return;
}
u = uPrime;
}
}
}
/* Fitting failed -- split at max error point and fit recursively */
tHatCenter = ComputeCenterTangent(d, outputSplitPoint.get());
FitCubic(d, first, outputSplitPoint.get(), tHat1, tHatCenter, error,result);
tHatCenter.negate();
FitCubic(d, outputSplitPoint.get(), last, tHatCenter, tHat2, error,result);
}
//Checked!!
static PointE[] GenerateBezier(Point2D[] d, int first, int last, double[] uPrime, Vector2d tHat1, Vector2d tHat2)
{
int i;
Vector2d[][] A = new Vector2d[MAXPOINTS][2]; /* Precomputed rhs for eqn */
int nPts; /* Number of pts in sub-curve */
double[][] C = new double[2][2]; /* Matrix C */
double[] X = new double[2]; /* Matrix X */
double det_C0_C1, /* Determinants of matrices */
det_C0_X,
det_X_C1;
double alpha_l, /* Alpha values, left and right */
alpha_r;
PointE[] bezCurve = new PointE[4]; /* RETURN bezier curve ctl pts */
nPts = last - first + 1;
/* Compute the A's */
for (i = 0; i < nPts; i++) {
Vector2d v1=new Vector2d(tHat1);
Vector2d v2=new Vector2d(tHat2);
v1.scale(B1(uPrime[i]));
v2.scale(B2(uPrime[i]));
A[i][0] = v1;
A[i][1] = v2;
}
/* Create the C and X matrices */
C[0][0] = 0.0;
C[0][1] = 0.0;
C[1][0] = 0.0;
C[1][1] = 0.0;
X[0] = 0.0;
X[1] = 0.0;
for (i = 0; i < nPts; i++) {
C[0][0] += A[i][0].dot(A[i][0]); //C[0][0] += V2Dot(&A[i][0], &A[i][0]);
C[0][1] += A[i][0].dot(A[i][1]); //C[0][1] += V2Dot(&A[i][0], &A[i][1]);
/* C[1][0] += V2Dot(&A[i][0], &A[i][9]);*/
C[1][0] = C[0][1]; //C[1][0] = C[0][1]
C[1][1] += A[i][1].dot(A[i][1]); //C[1][1] += V2Dot(&A[i][1], &A[i][1]);
Tuple2d scaleLastB2=new Vector2d(PointE.getPoint2d(d[last])); scaleLastB2.scale(B2(uPrime[i])); // V2ScaleIII(d[last], B2(uPrime[i]))
Tuple2d scaleLastB3=new Vector2d(PointE.getPoint2d(d[last])); scaleLastB3.scale(B3(uPrime[i])); // V2ScaleIII(d[last], B3(uPrime[i]))
Tuple2d dLastB2B3Sum=new Vector2d(scaleLastB2); dLastB2B3Sum.add(scaleLastB3); //V2AddII(V2ScaleIII(d[last], B2(uPrime[i])), V2ScaleIII(d[last], B3(uPrime[i]))
Tuple2d scaleFirstB1=new Vector2d(PointE.getPoint2d(d[first])); scaleFirstB1.scale(B1(uPrime[i])); //V2ScaleIII(d[first], B1(uPrime[i]))
Tuple2d sumScaledFirstB1andB2B3=new Vector2d(scaleFirstB1); sumScaledFirstB1andB2B3.add(dLastB2B3Sum); //V2AddII(V2ScaleIII(d[first], B1(uPrime[i])), V2AddII(V2ScaleIII(d[last], B2(uPrime[i])), V2ScaleIII(d[last], B3(uPrime[i])))
Tuple2d scaleFirstB0=new Vector2d(PointE.getPoint2d(d[first])); scaleFirstB0.scale(B0(uPrime[i])); //V2ScaleIII(d[first], B0(uPrime[i])
Tuple2d sumB0Rest=new Vector2d(scaleFirstB0); sumB0Rest.add(sumScaledFirstB1andB2B3); //V2AddII(V2ScaleIII(d[first], B0(uPrime[i])), V2AddII( V2ScaleIII(d[first], B1(uPrime[i])), V2AddII(V2ScaleIII(d[last], B2(uPrime[i])), V2ScaleIII(d[last], B3(uPrime[i]))))));
Vector2d tmp=new Vector2d(PointE.getPoint2d(d[first + i]));
tmp.sub(sumB0Rest);
X[0] += A[i][0].dot(tmp);
X[1] += A[i][1].dot(tmp);
}
/* Compute the determinants of C and X */
det_C0_C1 = C[0][0] * C[1][1] - C[1][0] * C[0][1];
det_C0_X = C[0][0] * X[1] - C[1][0] * X[0];
det_X_C1 = X[0] * C[1][1] - X[1] * C[0][1];
/* Finally, derive alpha values */
alpha_l = (det_C0_C1 == 0) ? 0.0 : det_X_C1 / det_C0_C1;
alpha_r = (det_C0_C1 == 0) ? 0.0 : det_C0_X / det_C0_C1;
/* If alpha negative, use the Wu/Barsky heuristic (see text) */
/* (if alpha is 0, you get coincident control points that lead to
* divide by zero in any subsequent NewtonRaphsonRootFind() call. */
double segLength = d[first].distance(d[last]); //(d[first] - d[last]).Length;
double epsilonRel = epsilon * segLength;
if (alpha_l < epsilonRel || alpha_r < epsilonRel) {
/* fall back on standard (probably inaccurate) formula, and subdivide further if needed. */
double dist = segLength / 3.0;
bezCurve[0] = new PointE(d[first]);
bezCurve[3] = new PointE(d[last]);
Vector2d b1Tmp=new Vector2d(tHat1); b1Tmp.scaleAdd(dist, bezCurve[0].getPoint2d());
bezCurve[1] = new PointE(b1Tmp); //(tHat1 * dist) + bezCurve[0];
Vector2d b2Tmp=new Vector2d(tHat2); b2Tmp.scaleAdd(dist, bezCurve[3].getPoint2d());
bezCurve[2] = new PointE(b2Tmp); //(tHat2 * dist) + bezCurve[3];
return (bezCurve);
}
/* First and last control points of the Bezier curve are */
/* positioned exactly at the first and last data points */
/* Control points 1 and 2 are positioned an alpha distance out */
/* on the tangent vectors, left and right, respectively */
bezCurve[0] = new PointE(d[first]);
bezCurve[3] = new PointE(d[last]);
Vector2d alphaLTmp=new Vector2d(tHat1); alphaLTmp.scaleAdd(alpha_l, bezCurve[0].getPoint2d());
bezCurve[1] = new PointE(alphaLTmp); //(tHat1 * alpha_l) + bezCurve[0]
Vector2d alphaRTmp=new Vector2d(tHat2); alphaRTmp.scaleAdd(alpha_r, bezCurve[3].getPoint2d());
bezCurve[2] = new PointE(alphaRTmp); //(tHat2 * alpha_r) + bezCurve[3];
return (bezCurve);
}
/*
* Reparameterize:
* Given set of points and their parameterization, try to find
* a better parameterization.
*
*/
static double[] Reparameterize(Point2D[] d,int first,int last,double[] u, Point2D[] bezCurve)
{
int nPts = last-first+1;
int i;
double[] uPrime = new double[nPts]; /* New parameter values */
for (i = first; i <= last; i++) {
uPrime[i-first] = NewtonRaphsonRootFind(bezCurve, d[i], u[i-first]);
}
return uPrime;
}
/*
* NewtonRaphsonRootFind :
* Use Newton-Raphson iteration to find better root.
*/
static double NewtonRaphsonRootFind(Point2D[] Q, Point2D P, double u)
{
double numerator, denominator;
Point2D[] Q1 = new Point2D[3]; //Q'
Point2D[] Q2 = new Point2D[2]; //Q''
Point2D Q_u, Q1_u, Q2_u; /*u evaluated at Q, Q', & Q'' */
double uPrime; /* Improved u */
int i;
/* Compute Q(u) */
Q_u = BezierII(3, Q, u);
/* Generate control vertices for Q' */
for (i = 0; i <= 2; i++) {
double qXTmp=(Q[i+1].getX() - Q[i].getX()) * 3.0; //Q1[i].x = (Q[i+1].x - Q[i].x) * 3.0;
double qYTmp=(Q[i+1].getY() - Q[i].getY()) * 3.0; //Q1[i].y = (Q[i+1].y - Q[i].y) * 3.0;
Q1[i]=new Point2D.Double(qXTmp, qYTmp);
}
/* Generate control vertices for Q'' */
for (i = 0; i <= 1; i++) {
double qXTmp=(Q1[i+1].getX() - Q1[i].getX()) * 2.0; //Q2[i].x = (Q1[i+1].x - Q1[i].x) * 2.0;
double qYTmp=(Q1[i+1].getY() - Q1[i].getY()) * 2.0; //Q2[i].y = (Q1[i+1].y - Q1[i].y) * 2.0;
Q2[i]=new Point2D.Double(qXTmp, qYTmp);
}
/* Compute Q'(u) and Q''(u) */
Q1_u = BezierII(2, Q1, u);
Q2_u = BezierII(1, Q2, u);
/* Compute f(u)/f'(u) */
numerator = (Q_u.getX() - P.getX()) * (Q1_u.getX()) + (Q_u.getY() - P.getY()) * (Q1_u.getY());
denominator = (Q1_u.getX()) * (Q1_u.getX()) + (Q1_u.getY()) * (Q1_u.getY()) + (Q_u.getX() - P.getX()) * (Q2_u.getX()) + (Q_u.getY() - P.getY()) * (Q2_u.getY());
if (denominator == 0.0f) return u;
/* u = u - f(u)/f'(u) */
uPrime = u - (numerator/denominator);
return (uPrime);
}
/*
* Bezier :
* Evaluate a Bezier curve at a particular parameter value
*
*/
static Point2D BezierII(int degree, Point2D[] V, double t)
{
int i, j;
Point2D Q; /* Point on curve at parameter t */
Point2D[] Vtemp; /* Local copy of control points */
/* Copy array */
Vtemp = new Point2D[degree+1];
for (i = 0; i <= degree; i++) {
Vtemp[i] = new Point2D.Double(V[i].getX(), V[i].getY());
}
/* Triangle computation */
for (i = 1; i <= degree; i++) {
for (j = 0; j <= degree-i; j++) {
double tmpX, tmpY;
tmpX = (1.0 - t) * Vtemp[j].getX() + t * Vtemp[j+1].getX();
tmpY = (1.0 - t) * Vtemp[j].getY() + t * Vtemp[j+1].getY();
Vtemp[j].setLocation(tmpX, tmpY);
}
}
Q = Vtemp[0];
return Q;
}
/*
* B0, B1, B2, B3 :
* Bezier multipliers
*/
static double B0(double u)
{
double tmp = 1.0 - u;
return (tmp * tmp * tmp);
}
static double B1(double u)
{
double tmp = 1.0 - u;
return (3 * u * (tmp * tmp));
}
static double B2(double u)
{
double tmp = 1.0 - u;
return (3 * u * u * tmp);
}
static double B3(double u)
{
return (u * u * u);
}
/*
* ComputeLeftTangent, ComputeRightTangent, ComputeCenterTangent :
*Approximate unit tangents at endpoints and "center" of digitized curve
*/
static Vector2d ComputeLeftTangent(Point[] d, int end)
{
Vector2d tHat1=new Vector2d(PointE.getPoint2d(d[end+1]));
tHat1.sub(PointE.getPoint2d(d[end]));
tHat1.normalize();
return tHat1;
}
static Vector2d ComputeRightTangent(Point[] d, int end)
{
//tHat2 = V2SubII(d[end-1], d[end]); tHat2 = *V2Normalize(&tHat2);
Vector2d tHat2=new Vector2d(PointE.getPoint2d(d[end-1]));
tHat2.sub(PointE.getPoint2d(d[end]));
tHat2.normalize();
return tHat2;
}
static Vector2d ComputeCenterTangent(Point[] d ,int center)
{
//V1 = V2SubII(d[center-1], d[center]);
Vector2d V1=new Vector2d(PointE.getPoint2d(d[center-1]));
V1.sub(new PointE(d[center]).getPoint2d());
//V2 = V2SubII(d[center], d[center+1]);
Vector2d V2=new Vector2d(PointE.getPoint2d(d[center]));
V2.sub(PointE.getPoint2d(d[center+1]));
//tHatCenter.x = (V1.x + V2.x)/2.0;
//tHatCenter.y = (V1.y + V2.y)/2.0;
//tHatCenter = *V2Normalize(&tHatCenter);
Vector2d tHatCenter=new Vector2d((V1.x + V2.x)/2.0, (V1.y + V2.y)/2.0);
tHatCenter.normalize();
return tHatCenter;
}
/*
* ChordLengthParameterize :
* Assign parameter values to digitized points
* using relative distances between points.
*/
static double[] ChordLengthParameterize(Point[] d,int first,int last)
{
int i;
double[] u = new double[last-first+1]; /* Parameterization */
u[0] = 0.0;
for (i = first+1; i <= last; i++) {
u[i-first] = u[i-first-1] + d[i-1].distance(d[i]);
}
for (i = first + 1; i <= last; i++) {
u[i-first] = u[i-first] / u[last-first];
}
return u;
}
/*
* ComputeMaxError :
* Find the maximum squared distance of digitized points
* to fitted curve.
*/
static double ComputeMaxError(Point2D[] d, int first, int last, Point2D[] bezCurve, double[] u, AtomicInteger splitPoint)
{
int i;
double maxDist; /* Maximum error */
double dist; /* Current error */
Point2D P; /* Point on curve */
Vector2d v; /* Vector from point to curve */
int tmpSplitPoint=(last - first + 1)/2;
maxDist = 0.0;
for (i = first + 1; i < last; i++) {
P = BezierII(3, bezCurve, u[i-first]);
v = new Vector2d(P.getX() - d[i].getX(), P.getY() - d[i].getY()); //P - d[i];
dist = v.lengthSquared();
if (dist >= maxDist) {
maxDist = dist;
tmpSplitPoint=i;
}
}
splitPoint.set(tmpSplitPoint);
return maxDist;
}
/**
* This is kind of a bridge between javax.vecmath and Java.util.Point2D
* @author Ruben
* @since 1.24
*/
public static class PointE extends Point2D.Double {
private static final long serialVersionUID = -1482403817370130793L;
public PointE(Tuple2d tup) {
super(tup.x, tup.y);
}
public PointE(Point2D p) {
super(p.getX(), p.getY());
}
public PointE(double x, double y) {
super(x, y);
}
public PointE scale(double dist) {
return new PointE(getX()*dist, getY()*dist);
}
public PointE scaleAdd(double dist, Point2D sum) {
return new PointE(getX()*dist + sum.getX(), getY()*dist + sum.getY());
}
public PointE substract(Point2D p) {
return new PointE(getX() - p.getX(), getY() - p.getY());
}
public Point2d getPoint2d() {
return getPoint2d(this);
}
public static Point2d getPoint2d(Point2D p) {
return new Point2d(p.getX(), p.getY());
}
}
ここでは、後者が機能している画像、白は線、赤はベジェです。
このアプローチを使用すると、使用するコントロールポイントが少なくなり、より正確になります。線作成の感度は、lineSensitivity属性を使用して調整できます。線をまったく使用したくない場合は、無限に設定してください。
これは改善できると確信しています。お気軽に投稿してください:)
アルゴリズムは削減を行っていません。私の投稿で最初に説明したため、削減を実行する必要があります。これがDouglasPeuckerReductionの実装です。これは、追加のFitCurvesよりも効率的に機能する場合があります（保存するポイントが少なく、レンダリングが高速です）。
import Java.awt.Point;
import Java.util.ArrayList;
import Java.util.Arrays;
import Java.util.LinkedList;
import Java.util.List;
public class DouglasPeuckerReduction {
public static List<Point> reduce(Point[] points, double tolerance)
{
if (points == null || points.length < 3) return Arrays.asList(points);
int firstPoint = 0;
int lastPoint = points.length - 1;
SortedList<Integer> pointIndexsToKeep;
try {
pointIndexsToKeep = new SortedList<Integer>(LinkedList.class);
} catch (Throwable t) {
t.printStackTrace(System.out);
ErrorReport.process(t);
return null;
}
//Add the first and last index to the keepers
pointIndexsToKeep.add(firstPoint);
pointIndexsToKeep.add(lastPoint);
//The first and the last point cannot be the same
while (points[firstPoint].equals(points[lastPoint])) {
lastPoint--;
}
reduce(points, firstPoint, lastPoint, tolerance, pointIndexsToKeep);
List<Point> returnPoints = new ArrayList<Point>(pointIndexsToKeep.size());
for (int pIndex : pointIndexsToKeep) {
returnPoints.add(points[pIndex]);
}
return returnPoints;
}
private static void reduce(Point[] points, int firstPoint, int lastPoint, double tolerance, List<Integer> pointIndexsToKeep) {
double maxDistance = 0;
int indexFarthest = 0;
Line tmpLine=new Line(points[firstPoint], points[lastPoint]);
for (int index = firstPoint; index < lastPoint; index++) {
double distance = tmpLine.getDistanceFrom(points[index]);
if (distance > maxDistance) {
maxDistance = distance;
indexFarthest = index;
}
}
if (maxDistance > tolerance && indexFarthest != 0) {
//Add the largest point that exceeds the tolerance
pointIndexsToKeep.add(indexFarthest);
reduce(points, firstPoint, indexFarthest, tolerance, pointIndexsToKeep);
reduce(points, indexFarthest, lastPoint, tolerance, pointIndexsToKeep);
}
}
}
ここでは、SortedListとLineの独自の実装を使用しています。申し訳ありませんが、自分で作成する必要があります。
私はそれをテストしていませんが、頭に浮かぶ1つのアプローチは、ある間隔で値をサンプリングし、ドットを接続するスプラインを作成することです。
たとえば、曲線のx値が0で始まり、10で終わるとします。したがって、x = 1,2,3,4,5,6,7,8,9,10でy値をサンプリングし、スプラインを作成します。ポイント（0、y（0））、（1、y（1））、...（10、y（10））から
ユーザーが誤ってスパイクを描くなどの問題がある可能性がありますが、一見の価値があるかもしれません
Krisの回答のSilverlightユーザーの場合、Pointは使用できず、Vectorは存在しません。これは、コードをサポートする最小限のVectorクラスです。
public class Vector
{
public double X { get; set; }
public double Y { get; set; }
public Vector(double x=0, double y=0)
{
X = x;
Y = y;
}
public static implicit operator Vector(Point b)
{
return new Vector(b.X, b.Y);
}
public static Point operator *(Vector left, double right)
{
return new Point(left.X * right, left.Y * right);
}
public static Vector operator -(Vector left, Point right)
{
return new Vector(left.X - right.X, left.Y - right.Y);
}
internal void Negate()
{
X = -X;
Y = -Y;
}
internal void Normalize()
{
double factor = 1.0 / Math.Sqrt(LengthSquared);
X *= factor;
Y *= factor;
}
public double LengthSquared { get { return X * X + Y * Y; } }
}
また、Lengthおよび+、-演算子の使用にも対処する必要がありました。 FitCurvesクラスに関数を追加し、コンパイラーが文句を言った場所でそれらの使用法を書き直すことを選択しました。
public static double Length(Point a, Point b)
{
double x = a.X-b.X;
double y = a.Y-b.Y;
return Math.Sqrt(x*x+y*y);
}
public static Point Add(Point a, Point b)
{
return new Point(a.X + b.X, a.Y + b.Y);
}
public static Point Subtract(Point a, Point b)
{
return new Point(a.X - b.X, a.Y - b.Y);
}