web-dev-qa-db-ja.com

ローカルでWindows認証が機能しないIIS 7.5。エラー401.1

最近、ASP.net 4.0サイトへのローカルインスタンスIIS 7.5（Windows 7 Pro）でWindows認証を使用できるようにするという厄介な問題がありました。基本的な手順に従いました。

IIS認証

  • 匿名認証を無効にする
  • Windows認証を有効にする

Web.configを編集します

<authentication mode="Windows" />

これにより、Windows認証が有効になりましたが、ログインの試みはすべて拒否され、最終的に401.1エラーが返されました。これが問題の始まりです。これには多くの理由があるように見えますが、ここにはStack Overflowを含め、Webの周辺でよく文書化されています。

私が試しました：

  • IIS拡張認証とカーネルモード認証を無効にするためのWindows認証の認証「詳細設定」
  • IIS認証 'プロバイダー'を編集してNTLMをネゴシエートの上に移動します。
  • IIS .NET認証ルールを明示的にユーザーに許可する（およびその他のさまざまな組み合わせ）を編集する。
  • さまざまなIISコマンドラインスクリプトと調整。
  • Web.configファイルのさまざまな設定の調整。
  • 一部のファイルシステムのアクセス許可の調整ですらあります。

しかし、何の役にも立たず、恐ろしい401.1が残った。

これは本当に「木に木が見えない」場合です。私が見つけることができた解決策はどれもありません（あなたがそうだとしたら悪い検索パラメータのケースと呼んでください）ので、私はこの質問を投稿する価値があると思いました。

c#asp.netwindowsiiswindows-authentication
40
PeteWiFi

ここでの問題は、Windowsの最新バージョン（Windows XP SP2、Windows Server 2003 SP1以降）には、コンピューターへのリフレクション攻撃を防ぐように設計されたループバックチェックセキュリティ機能が含まれていることです。使用するFQDNまたはカスタムホストヘッダーがローカルコンピューター名と一致しない場合、認証は失敗します。

これは、ホスト名を明示的に指定するか、ループバックチェックを無効にすることで解決できます。明らかに、前者はより制御されたアプローチです。

  1. DisableStrictNameCheckingレジストリエントリを1に設定します。 281308（注：これはWindows Server 2008/Vista以降では不要です）
  2. レジストリエディターで、次のレジストリキーを見つけてクリックします：HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
  3. [MSV1_0]を右クリックし、[新規]をポイントして、[複数行文字列値]をクリックします。
  4. BackConnectionHostNamesと入力し、Enterキーを押します。
  5. BackConnectionHostNamesを右クリックし、[変更]をクリックします。
  6. [値のデータ]ボックスに、ローカルコンピューター上にあるサイトのホスト名またはホスト名を入力し、[OK]をクリックします。
  7. レジストリエディターを終了し、IISAdminサービスを再起動します。

これを行う方法の詳細は、MSDNで確認できます。 896861

これが誰かを助けることを願っています。別の提案や改善点がある場合は追加してください。

71
PeteWiFi

IIS機能を再インストールし、WINDOWS認証チェックボックスのステータスがチェックされていることを確認します。

2
funkyfoobar

以下は、バックコネクションのホスト名とIISを処理するために使用するPowerShellコードです。少し手間をかけると、コマンドレットをモジュールに保存してその方法で使用できることに注意してください。

Import-Module WebAdministration

function Add-BackConnectionHostname
{
    <#
    .SYNOPSIS
    Adds the back connection hostnames that will bypass the server loopback check.
    .DESCRIPTION
    Adds the hostname to the list of back connection hostnames that will bypass the server loopback check. Back connection Host names  
    can be used to address the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861.
    .EXAMPLE
    Add-BackConnectionHostname mywebsite.mydomain.tld
    .EXAMPLE
    Add-BackConnectionHostname mywebsite1.mydomain.tld, mywebsite2.mydomain.tld
    .PARAMETER Hostname
    The Hostname to add to the back connection hostnames list.
    .LINK
    Remove-BackConnectionHostname
    Get-BackConnectionHostname
    Enable-ServerLoopbackCheck
    Disable-ServerLoopbackCheck
    Get-ServerLoopbackCheck
    "You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.Microsoft.com/en-us/kb/896861)
    #>
    [CmdletBinding(SupportsShouldProcess = $true)]
    param
    (
        [Parameter(ValueFromPipeline = $true, Mandatory = $true)]
        [string] $Hostname
    )

    begin
    {
        $keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0"
        $propertyName = "BackConnectionHostnames"
        $key = Get-Item $keyPath
        $property = $null
        $propertyValues = $null

        if ($key -ne $null)
        {
            $property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue

            if ($property -eq $null)
            {
                $property = New-ItemProperty $keyPath -Name $propertyName -Value $null -PropertyType ([Microsoft.Win32.RegistryValueKind]::MultiString) -ErrorAction Stop

                Write-Verbose "Created the $($propertyName) property."
            }

            if ($property -ne $null)
            {
                $propertyValues = $property.$propertyName
            }
        }
    }

    process
    {
        if ($property -ne $null)
        {
            foreach ($hostNameValue in $Hostname)
            {
                if ([string]::IsNullOrWhiteSpace($hostName) -eq $false -and $propertyValues -notcontains $hostNameValue)
                {
                    $propertyValues += $hostNameValue

                    Write-Verbose "Added $($hostName) to the back connection hostnames."
                }
                else
                {
                    Write-Verbose "Back connection Host names already has an entry for $($hostName)."
                }
            }
        }
    }

    end
    {
        if ($propertyValues -ne $null)
        {
            $propertyValues = $propertyValues | ?{ [string]::IsNullOrWhiteSpace($_) -eq $false } | Sort -Unique
            Set-ItemProperty $keyPath -Name $propertyName -Value $propertyValues
        }
    }
}

function Remove-BackConnectionHostname
{
    <#
    .SYNOPSIS
    Removes the hostname from the list of back connection hostnames that will bypass the server loopback check.
    .DESCRIPTION
    Removes the hostname from the list of back connection hostnames that will bypass the server loopback check.
    .EXAMPLE
    Remove-BackConnectionHostname mywebsite.mydomain.tld
    .EXAMPLE
    Remove-BackConnectionHostname mywebsite1.mydomain.tld, mywebsite2.mydomain.tld
    .PARAMETER Hostname
    The Hostname to remove from the back connection hostnames list.
    .LINK
    Add-BackConnectionHostname
    Get-BackConnectionHostname
    Enable-ServerLoopbackCheck
    Disable-ServerLoopbackCheck
    Get-ServerLoopbackCheck
    "You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.Microsoft.com/en-us/kb/896861)
    #>
    [CmdletBinding(SupportsShouldProcess = $true)]
    param
    (
        [Parameter(ValueFromPipeline = $true, Mandatory = $true)]
        [string] $Hostname
    )

    begin
    {
        $keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0"
        $propertyName = "BackConnectionHostnames"
        $key = Get-Item $keyPath
        $property = $null
        $propertyValues = $null

        if ($key -ne $null)
        {
            $property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue

            if ($property -ne $null)
            {
                $propertyValues = $property.$propertyName
            }
            else
            {
                Write-Verbose "The $($propertyName) property was not found."
            }
        }
    }

    process
    {
        if ($property -ne $null)
        {
            foreach ($hostNameValue in $Hostname)
            {
                if ($propertyValues -contains $hostNameValue)
                {
                    $propertyValues = $propertyValues | ? { $_ -ne $hostName }

                    Write-Verbose "Removed $($hostName) from the $($propertyName) property."
                }
                else
                {
                    Write-Verbose "No entry for $($hostName) was found in the $($propertyName) property."
                }
            }
        }
    }

    end
    {
        if ($property -ne $null)
        {
            $propertyValues = $propertyValues | ?{ [string]::IsNullOrWhiteSpace($_) -eq $false } | Sort -Unique

            if ($propertyValues.Length -ne 0)
            {
                Set-ItemProperty $keyPath -Name $propertyName -Value $propertyValues
            }
            else
            {
                Remove-ItemProperty $keyPath -Name $propertyName

                Write-Verbose "No entries remain after removing $($hostName). The $($propertyName) property was removed."
            }
        }
    }
}

function Get-BackConnectionHostname
{
    <#
    .SYNOPSIS
    Gets the list of back connection hostnames that will bypass the server loopback check.
    .DESCRIPTION
    Gets the back connection hostnames that will bypass the server loopback check. Back connection Host names can be used to address 
    the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861.
    .EXAMPLE
    Get-BackConnectionHostname
    .LINK
    Add-BackConnectionHostname
    Remove-BackConnectionHostname
    Enable-ServerLoopbackCheck
    Disable-ServerLoopbackCheck
    Get-ServerLoopbackCheck
    "You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.Microsoft.com/en-us/kb/896861)
    #>
    [CmdletBinding(SupportsShouldProcess = $false)]
    param
    (
    )

    begin
    {
        $keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0"
        $propertyName = "BackConnectionHostnames"
        $key = Get-Item $keyPath
        $property = $null

        if ($key -ne $null)
        {
            $property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue

            if ($property -eq $null)
            {
                Write-Verbose "The $($propertyName) property was not found."
            }
        }
    }

    process
    {
        $propertyValues = $null

        if ($property -ne $null)
        {
            $propertyValues = $property.$propertyName
        }

        return $propertyValues
    }

    end
    {
    }
}

function Enable-ServerLoopbackCheck
{
    <#
    .SYNOPSIS
    Enables the server loopback check. Enabled is the normal state for a Windows Server.
    .DESCRIPTION
    Enables the server loopback check. Having the loopback check enabled is the normal state for a Windows Server. Disabling the loopback check can be used to address 
    the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861. It is NOT the preferred method. See the KB article for more details.
    .EXAMPLE
    Enable-ServerLoopbackCheck
    .LINK
    Add-BackConnectionHostname
    Remove-BackConnectionHostname
    Get-BackConnectionHostname
    Enable-ServerLoopbackCheck
    Get-ServerLoopbackCheck
    "You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.Microsoft.com/en-us/kb/896861)
    #>
    [CmdletBinding(SupportsShouldProcess = $true)]
    param
    (
    )

    begin
    {
        $keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa"
        $propertyName = "DisableLoopbackCheck"
        $key = Get-Item $keyPath
        $property = $null

        if ($key -ne $null)
        {
            $property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue

            if ($property -eq $null)
            {
                Write-Verbose "The $($propertyName) property was not found."
            }
        }
    }

    process
    {
        if ($property -ne $null)
        {
            Set-ItemProperty $keyPath -Name $propertyName -Value 0
        }
    }

    end
    {
    }
}

function Disable-ServerLoopbackCheck
{
    <#
    .SYNOPSIS
    Disables the server loopback check for all hostnames. Enabled is the normal state for a Windows Server.
    .DESCRIPTION
    Disables the server loopback check for all hostnames. Having the loopback check enabled is the normal state for a Windows Server. Disabling the loopback check can be used 
    to address the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861. It is NOT the preferred method. See the KB article for more details.
    .EXAMPLE
    Disable-ServerLoopbackCheck
    .LINK
    Add-BackConnectionHostname
    Remove-BackConnectionHostname
    Get-BackConnectionHostname
    Enable-ServerLoopbackCheck
    Get-ServerLoopbackCheck
    "You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.Microsoft.com/en-us/kb/896861)
    #>
    [CmdletBinding(SupportsShouldProcess = $true)]
    param
    (
    )

    begin
    {
        $keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa"
        $propertyName = "DisableLoopbackCheck"
        $key = Get-Item $keyPath
        $property = $null

        if ($key -ne $null)
        {
            $property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue

            if ($property -eq $null)
            {
                Write-Verbose "The $($propertyName) property was not found."
            }
        }
    }

    process
    {
        if ($property -ne $null)
        {
            Set-ItemProperty $keyPath -Name $propertyName -Value 1
        }
        else
        {
            $property = New-ItemProperty $keyPath -Name $propertyName -PropertyType ([Microsoft.Win32.RegistryValueKind]::DWord) -Value 1
        }
    }

    end
    {
    }
}

function Get-ServerLoopbackCheck
{
    <#
    .SYNOPSIS
    Gets the status of the server loopback check. Enabled is the normal state for a Windows Server.
    .DESCRIPTION
    Gets the status of the server loopback check. Having the loopback check enabled is the normal state for a Windows Server. Disabling the loopback check can be used 
    to address the problem with IIS sites using Windows Authentication that is described in Microsoft KB896861. It is NOT the preferred method. See the KB article for 
    more details.
    .EXAMPLE
    Get-ServerLoopbackCheck
    .LINK
    Add-BackConnectionHostname
    Remove-BackConnectionHostname
    Get-BackConnectionHostname
    Enable-ServerLoopbackCheck
    Disable-ServerLoopbackCheck
    "You receive error 401.1 when you browse a Web site that uses Integrated Authentication and is hosted on IIS 5.1 or a later version" (http://support.Microsoft.com/en-us/kb/896861)
    #>
    [CmdletBinding(SupportsShouldProcess = $false)]
    param
    (
    )

    begin
    {
        $keyPath = "HKLM:\SYSTEM\CurrentControlSet\Control\Lsa"
        $propertyName = "DisableLoopbackCheck"
        $key = Get-Item $keyPath
        $property = $null

        if ($key -ne $null)
        {
            $property = Get-ItemProperty $keyPath -Name $propertyName -ErrorAction SilentlyContinue
        }
    }

    process
    {
        $loopbackCheckStatus = "Enabled"

        if ($property -ne $null)
        {
            switch ($property)
            {
                0 { $loopbackCheckStatus = "Enabled" }
                1 { $loopbackCheckStatus = "Disabled" }
                default { $loopbackCheckStatus = "Unknown" }
            }
        }

        return $loopbackCheckStatus
    }

    end
    {
    }
}

function Get-WebsiteHostname
{
    <#
    .SYNOPSIS
    Gets the hostnames for the IP addresses bound to a web site.
    .DESCRIPTION
    Gets the hostnames for the IP addresses bound to a web site. Where a Host header exists, the Host header is used; otherwise, the IP address is looked up
    in DNS to see if a PTR record exists.
    .EXAMPLE
    Get-WebSiteHostname $webSite
    .EXAMPLE
    Get-WebSiteHostname -Name 'Default Web Site'
    .EXAMPLE
    Get-Website | Get-WebSiteHostname
    .LINK
    Get-Website 
    #>
    [CmdletBinding(SupportsShouldProcess = $false)]
    param
    (
        [Parameter(ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true, Mandatory = $true)]
        [string] $Name
    )

    process
    {
        $siteHostnames = @()

        foreach ($webSiteName in $Name)
        {
            $bindings = Get-WebBinding -Name $Name

            foreach ($binding in $bindings)
            {
                $bindingInfo = $binding.bindingInformation.Split(':')
                $hostHeader = $bindingInfo[2]
                $bindingInfoAddress = $null
                $isValidIP = [System.Net.IPAddress]::TryParse($bindingInfo[0], [ref] $bindingInfoAddress)
                $siteHostname = $null

                if ($bindingInfo -eq '*')
                {
                    Write-Warning "The $($webSiteName) web site has a binding address set to All Unassigned."
                }
                elseif ([string]::IsNullOrWhiteSpace($hostHeader) -eq $false)
                {
                    $siteHostname = $hostHeader
                    Write-Verbose "The $($webSiteName) web site has a Host header set to $($siteHostname)."
                }
                elseif ($isValidIP -eq $true)
                {
                    $siteHostname = (Resolve-DnsName $bindingInfoAddress -DnsOnly PTR -ErrorAction SilentlyContinue).NameHost

                    if ($siteHostname -ne $null)
                    {
                        Write-Verbose "The $($webSiteName) web site has an IP Address $($bindingInfoAddress) that resolves to $($siteHostname)."
                    }
                    else
                    {
                        Write-Warning "The $($webSiteName) web site has an IP Address $($bindingInfoAddress) with no PTR record."
                    }
                }
            }

            if ($siteHostname -ne $null)
            {
                $siteHostnames += $siteHostname
            }
        }

        return $siteHostnames | Sort -Unique
    }
}

Get-Website | ?{ (Get-WebConfiguration -Filter '/system.web/authentication' -PSPath $_.PSPath).mode -eq 'Windows' } | Get-WebsiteHostname | Add-BackConnectionHostname
1
JamieSee