.batファイルで2つのアプリを同時に起動するにはどうすればよいですか?私の現在のテキストは
cd mydir
my.exe
my.exe difParams
//bat is finished. i dont want my.exe to close
start "MY EXE" my.exe
これにより、exeがバックグラウンドで開始されます(タイトルの問題が回避されます。以下を参照してください)。
Startコマンドにはいくつかのオプションもあります。start /?
を使用してそれらを一覧表示します。
C:>start /?
Starts a separate window to run a specified program or command.
START ["title"] [/D path] [/I] [/MIN] [/MAX] [/SEPARATE | /SHARED]
[/LOW | /NORMAL | /HIGH | /REALTIME | /ABOVENORMAL | /BELOWNORMAL]
[/NODE <NUMA node>] [/AFFINITY <hex affinity mask>] [/WAIT] [/B]
[command/program] [parameters]
"title" Title to display in window title bar.
path Starting directory.
B Start application without creating a new window. The
application has ^C handling ignored. Unless the application
enables ^C processing, ^Break is the only way to interrupt
the application.
I The new environment will be the original environment passed
to the cmd.exe and not the current environment.
MIN Start window minimized.
MAX Start window maximized.
SEPARATE Start 16-bit Windows program in separate memory space.
SHARED Start 16-bit Windows program in shared memory space.
LOW Start application in the IDLE priority class.
NORMAL Start application in the NORMAL priority class.
HIGH Start application in the HIGH priority class.
REALTIME Start application in the REALTIME priority class.
ABOVENORMAL Start application in the ABOVENORMAL priority class.
BELOWNORMAL Start application in the BELOWNORMAL priority class.
NODE Specifies the preferred Non-Uniform Memory Architecture (NUMA)
node as a decimal integer.
AFFINITY Specifies the processor affinity mask as a hexadecimal number.
The process is restricted to running on these processors.
The affinity mask is interpreted differently when /AFFINITY and
/NODE are combined. Specify the affinity mask as if the NUMA
node's processor mask is right shifted to begin at bit zero.
The process is restricted to running on those processors in
common between the specified affinity mask and the NUMA node.
If no processors are in common, the process is restricted to
running on the specified NUMA node.
WAIT Start application and wait for it to terminate.
command/program
If it is an internal cmd command or a batch file then
the command processor is run with the /K switch to cmd.exe.
This means that the window will remain after the command
has been run.
If it is not an internal cmd command or batch file then
it is a program and will run as either a windowed application
or a console application.
parameters These are the parameters passed to the command/program.
トリッキーな点は、「タイトル」が実行可能ファイルとそのパラメーターの前に来ることです。そのため、引数を正しく解析し始めるためだけに、アプリにタイトルを付ける必要がある場合があります。 :-|