Raspberry PiでDHCPサーバーをセットアップしようとしていますが、サービスisc-dhcp-serverを再起動できません。
サービスが再起動されないのはなぜですか?
ifconfig
eth0 Link encap:Ethernet HWaddr X
inet6 addr: fe80::3d41:3edd:7319:617e/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth1 Link encap:Ethernet HWaddr X
inet addr:169.254.6.116 Bcast:169.254.255.255 Mask:255.255.0.0
inet6 addr: fe80::f16d:b76f:795e:d4ff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:299 errors:0 dropped:0 overruns:0 frame:0
TX packets:72 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:40462 (39.5 KiB) TX bytes:20406 (19.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:200 errors:0 dropped:0 overruns:0 frame:0
TX packets:200 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:16656 (16.2 KiB) TX bytes:16656 (16.2 KiB)
wlan0 Link encap:Ethernet HWaddr X
inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::704a:b2ae:8ac9:48e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1022 errors:0 dropped:11 overruns:0 frame:0
TX packets:726 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:125229 (122.2 KiB) TX bytes:114072 (111.3 KiB)
/ etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet dhcp
address 192.168.2.1
netmask 255.0.0.0
allow-hotplug wlan0
iface wlan0 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
allow-hotplug wlan1
iface wlan1 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
/ etc/dhcp/dhcpd.conf
ddns-update-style none;
log-facility local7;
subnet 192.168.2.0 netmask 255.255.255.0 {
option routers 192.168.2.1;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.2.255;
option domain-name-servers 194.168.2.1;
option ntp-servers 192.168.2.1;
option netbios-name-servers 192.168.2.1;
option netbios-node-type 2;
default-lease-time 86400;
max-lease-time 86400;
pool {
range 192.168.2.2 192.168.2.254;
}
Host gateway {
hardware ethernet x;
fixed-address 192.168.2.1;
}
}
service isc-dhcp-server restart
Job for isc-dhcp-server.service failed. See 'systemctl status isc-dhcp-server.service' and 'journalctl -xn' for details.
systemctl status isc-dhcp-server.service
Mar 25 20:33:55 raspberrypi dhcpd[1146]:
Mar 25 20:33:55 raspberrypi dhcpd[1146]: No subnet declaration for wlan0 (192.168.0.102).
Mar 25 20:33:55 raspberrypi dhcpd[1146]: ** Ignoring requests on wlan0. If this is not what
Mar 25 20:33:55 raspberrypi dhcpd[1146]: you want, please write a subnet declaration
Mar 25 20:33:55 raspberrypi dhcpd[1146]: in your dhcpd.conf file for the network segment
Mar 25 20:33:57 raspberrypi isc-dhcp-server[1138]: Starting ISC DHCP server: dhcpdcheck syslog for diagnostics. ... failed!
Mar 25 20:33:57 raspberrypi isc-dhcp-server[1138]: failed!
Mar 25 20:33:57 raspberrypi systemd[1]: isc-dhcp-server.service: control process exited, code=exited status=1
Mar 25 20:33:57 raspberrypi systemd[1]: Failed to start LSB: DHCP server.
Mar 25 20:33:57 raspberrypi systemd[1]: Unit isc-dhcp-server.service entered failed state
[〜#〜]編集済み[〜#〜]
/ etc/default/isc-dhcp-server
# Defaults for isc-dhcp-server initscript
# sourced by /etc/init.d/isc-dhcp-server
# installed at /etc/default/isc-dhcp-server by the maintainer scripts
#
# This is a POSIX Shell fragment
#
# Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).
#DHCPD_CONF=/etc/dhcp/dhcpd.conf
# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).
#DHCPD_PID=/var/run/dhcpd.pid
# Additional options to start dhcpd with.
# Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead
#OPTIONS=""
# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
# Separate multiple interfaces with spaces, e.g. "eth0 eth1".
INTERFACES="eth1"
/etc/network/interfaces
で、eth1のスタンザを次のように変更する必要があります。
auto eth1
iface eth1 inet static
address 192.168.2.1
netmask 255.255.255.0
あなたは今/etc/default/isc-dhcp-server
を持っているようです