web-dev-qa-db-ja.com

ssh-なぜ部分的なパスワードでログインできるのですか？

12文字の英数字のユーザーパスワードを持つマシン（Arago dist）があるとします。 ssh経由でパスワード認証を使用してログインすると、数日前に、8文字のパスワードのみ、またはパスワード全体の後に任意の文字を入力できることに気付きました。両方の状況での共通の結果は、ログインの成功です。なぜこうなった？

この特定のケースでは、複数の理由に基づいて公開キー認証を使用したくありません。

追加情報として、このディストリビューションでは、ファイル/ etc/shadowおよび/ etc/security/policy.confがありません。

ここではサーバーのssh設定：

[user@machine:~] cat /etc/ssh/sshd_config

#   $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $
# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

Banner /etc/ssh/welcome.msg

#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# Disable legacy (protocol version 1) support in the server for new
# installations. In future the default will change to require explicit
# activation of protocol 1
Protocol 2

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_Host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_Host_rsa_key
#HostKey /etc/ssh/ssh_Host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024

# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys

# For this to work you will also need Host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes

# Set this to 'yes' to enable PAM authentication, account processing, 
# and session processing. If this is enabled, PAM authentication will 
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
#UsePAM no

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation no
#PermitUserEnvironment no
Compression no
ClientAliveInterval 15
ClientAliveCountMax 4
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
#ChrootDirectory none

# no default banner path
#Banner none

# override default of no subsystems
Subsystem   sftp    /usr/libexec/sftp-server

# Example of overriding settings on a per-user basis
#Match User anoncvs
#   X11Forwarding no
#   AllowTcpForwarding no
#   ForceCommand cvs server


ここではsshクライアントの出力：

myself@ubuntu:~$ ssh -vvv [email protected]
OpenSSH_6.6.1, OpenSSL 1.0.1f 6 Jan 2014
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 192.168.1.1 [192.168.1.1] port 22.
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/home/myself/.ssh/id_rsa" as a RSA1 public key
debug1: identity file /home/myself/.ssh/id_rsa type 1
debug1: identity file /home/myself/.ssh/id_rsa-cert type -1
debug1: identity file /home/myself/.ssh/id_dsa type -1
debug1: identity file /home/myself/.ssh/id_dsa-cert type -1
debug1: identity file /home/myself/.ssh/id_ecdsa type -1
debug1: identity file /home/myself/.ssh/id_ecdsa-cert type -1
debug1: identity file /home/myself/.ssh/id_ed25519 type -1
debug1: identity file /home/myself/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.6.1p1 Ubuntu-2ubuntu2.8
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.6
debug1: match: OpenSSH_5.6 pat OpenSSH_5* compat 0x0c000000
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for Host "192.168.1.1" from file "/home/myself/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/myself/.ssh/known_hosts:26
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: [email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit: none
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: mac_setup: setup hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: setup hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<3072<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: bits set: 1481/3072
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server Host key: RSA 91:66:c0:07:e0:c0:df:b7:8e:49:97:b5:36:12:12:ea
debug3: load_hostkeys: loading entries for Host "192.168.1.1" from file "/home/myself/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/myself/.ssh/known_hosts:26
debug3: load_hostkeys: loaded 1 keys
debug1: Host '192.168.1.1' is known and matches the RSA Host key.
debug1: Found key in /home/myself/.ssh/known_hosts:26
debug2: bits set: 1551/3072
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/myself/.ssh/id_rsa (0x802b9240),
debug2: key: /home/myself/.ssh/id_dsa ((nil)),
debug2: key: /home/myself/.ssh/id_ecdsa ((nil)),
debug2: key: /home/myself/.ssh/id_ed25519 ((nil)),
debug3: input_userauth_banner
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /home/myself/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug1: Trying private key: /home/myself/.ssh/id_dsa
debug3: no such identity: /home/myself/.ssh/id_dsa: No such file or directory
debug1: Trying private key: /home/myself/.ssh/id_ecdsa
debug3: no such identity: /home/myself/.ssh/id_ecdsa: No such file or directory
debug1: Trying private key: /home/myself/.ssh/id_ed25519
debug3: no such identity: /home/myself/.ssh/id_ed25519: No such file or directory
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: 
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
[email protected]'s password: 
debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to 192.168.1.1 ([192.168.1.1]:22).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug2: callback start
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x10
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 1
debug1: Sending environment.
debug3: Ignored env XDG_VTNR
debug3: Ignored env MANPATH
debug3: Ignored env XDG_SESSION_ID
debug3: Ignored env CLUTTER_IM_MODULE
debug3: Ignored env SELINUX_INIT
debug3: Ignored env XDG_GREETER_DATA_DIR
debug3: Ignored env COMP_WORDBREAKS
debug3: Ignored env SESSION
debug3: Ignored env NVM_CD_FLAGS
debug3: Ignored env GPG_AGENT_INFO
debug3: Ignored env TERM
debug3: Ignored env Shell
debug3: Ignored env XDG_MENU_PREFIX
debug3: Ignored env VTE_VERSION
debug3: Ignored env NVM_PATH
debug3: Ignored env GVM_ROOT
debug3: Ignored env WINDOWID
debug3: Ignored env UPSTART_SESSION
debug3: Ignored env GNOME_KEYRING_CONTROL
debug3: Ignored env GTK_MODULES
debug3: Ignored env NVM_DIR
debug3: Ignored env USER
debug3: Ignored env LD_LIBRARY_PATH
debug3: Ignored env LS_COLORS
debug3: Ignored env XDG_SESSION_PATH
debug3: Ignored env XDG_SEAT_PATH
debug3: Ignored env SSH_AUTH_SOCK
debug3: Ignored env SESSION_MANAGER
debug3: Ignored env DEFAULTS_PATH
debug3: Ignored env XDG_CONFIG_DIRS
debug3: Ignored env PATH
debug3: Ignored env DESKTOP_SESSION
debug3: Ignored env QT_IM_MODULE
debug3: Ignored env QT_QPA_PLATFORMTHEME
debug3: Ignored env NVM_NODEJS_ORG_MIRROR
debug3: Ignored env GVM_VERSION
debug3: Ignored env JOB
debug3: Ignored env PWD
debug3: Ignored env XMODIFIERS
debug3: Ignored env GNOME_KEYRING_PID
debug1: Sending env LANG = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug3: Ignored env gvm_pkgset_name
debug3: Ignored env GDM_LANG
debug3: Ignored env MANDATORY_PATH
debug3: Ignored env IM_CONFIG_PHASE
debug3: Ignored env COMPIZ_CONFIG_PROFILE
debug3: Ignored env GDMSESSION
debug3: Ignored env SESSIONTYPE
debug3: Ignored env XDG_SEAT
debug3: Ignored env HOME
debug3: Ignored env SHLVL
debug3: Ignored env GOROOT
debug3: Ignored env LANGUAGE
debug3: Ignored env GNOME_DESKTOP_SESSION_ID
debug3: Ignored env DYLD_LIBRARY_PATH
debug3: Ignored env gvm_go_name
debug3: Ignored env LOGNAME
debug3: Ignored env GVM_OVERLAY_PREFIX
debug3: Ignored env COMPIZ_BIN_PATH
debug3: Ignored env XDG_DATA_DIRS
debug3: Ignored env QT4_IM_MODULE
debug3: Ignored env DBUS_SESSION_BUS_ADDRESS
debug3: Ignored env PrlCompizSessionClose
debug3: Ignored env PKG_CONFIG_PATH
debug3: Ignored env GOPATH
debug3: Ignored env NVM_BIN
debug3: Ignored env LESSOPEN
debug3: Ignored env NVM_IOJS_ORG_MIRROR
debug3: Ignored env INSTANCE
debug3: Ignored env TEXTDOMAIN
debug3: Ignored env XDG_RUNTIME_DIR
debug3: Ignored env DISPLAY
debug3: Ignored env XDG_CURRENT_DESKTOP
debug3: Ignored env GTK_IM_MODULE
debug3: Ignored env LESSCLOSE
debug3: Ignored env TEXTDOMAINDIR
debug3: Ignored env GVM_PATH_BACKUP
debug3: Ignored env COLORTERM
debug3: Ignored env XAUTHORITY
debug3: Ignored env _
debug2: channel 0: request Shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: Shell request accepted on channel 0


ここではsshdサーバーの出力：

debug1: sshd version OpenSSH_5.6p1
debug1: read PEM private key done: type RSA
debug1: private Host key: #0 type 1 RSA
debug1: read PEM private key done: type DSA
debug1: private Host key: #1 type 2 DSA
debug1: rexec_argv[0]='/usr/sbin/sshd'
debug1: rexec_argv[1]='-d'
Set /proc/self/oom_adj from 0 to -17
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
socket: Address family not supported by protocol
debug1: Server will not fork when running in debugging mode.
debug1: rexec start in 4 out 4 newsock 4 pipe -1 sock 7
debug1: inetd sockets after dupping: 3, 3
Connection from 192.168.1.60 port 53445
debug1: Client protocol version 2.0; client software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2.8
debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2.8 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.6
debug1: list_hostkey_types: ssh-rsa,ssh-dss
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received
debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT
debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: KEX done
debug1: userauth-request for user user service ssh-connection method none
debug1: attempt 0 failures 0
debug1: userauth_send_banner: sent
Failed none for user from 192.168.1.60 port 53445 ssh2
debug1: userauth-request for user user service ssh-connection method publickey
debug1: attempt 1 failures 0
debug1: test whether pkalg/pkblob are acceptable
debug1: temporarily_use_uid: 0/0 (e=0/0)
debug1: trying public key file //.ssh/authorized_keys
debug1: Could not open authorized keys '//.ssh/authorized_keys': No such file or directory
debug1: restore_uid: 0/0
debug1: temporarily_use_uid: 0/0 (e=0/0)
debug1: trying public key file //.ssh/authorized_keys2
debug1: Could not open authorized keys '//.ssh/authorized_keys2': No such file or directory
debug1: restore_uid: 0/0
Failed publickey for user from 192.168.1.60 port 53445 ssh2
debug1: userauth-request for user user service ssh-connection method keyboard-interactive
debug1: attempt 2 failures 1
debug1: keyboard-interactive devs 
debug1: auth2_challenge: user=user devs=
debug1: kbdint_alloc: devices ''
Failed keyboard-interactive for user from 192.168.1.60 port 53445 ssh2
debug1: Unable to open the btmp file /var/log/btmp: No such file or directory
debug1: userauth-request for user user service ssh-connection method password
debug1: attempt 3 failures 2
Could not get shadow information for user
Accepted password for user from 192.168.1.60 port 53445 ssh2
debug1: Entering interactive session for SSH2.
debug1: server_init_dispatch_20
debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384
debug1: input_session_request
debug1: channel 0: new [server-session]
debug1: session_new: session 0
debug1: session_open: channel 0
debug1: session_open: session 0: link with channel 0
debug1: server_input_channel_open: confirm session
debug1: server_input_global_request: rtype [email protected] want_reply 0
debug1: server_input_channel_req: channel 0 request pty-req reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req pty-req
debug1: Allocating pty.
debug1: session_pty_req: session 0 alloc /dev/pts/1
debug1: server_input_channel_req: channel 0 request env reply 0
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req env
debug1: server_input_channel_req: channel 0 request Shell reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req Shell
debug1: Setting controlling tty using TIOCSCTTY.


/ etc/pam.d/sshd：

# PAM configuration for the Secure Shell service

# Read environment variables from /etc/environment and
# /etc/security/pam_env.conf.
auth       required     pam_env.so # [1]

# Standard Un*x authentication.
auth       include      common-auth

# Disallow non-root logins when /etc/nologin exists.
account    required     pam_nologin.so

# Uncomment and edit /etc/security/access.conf if you need to set complex
# access limits that are hard to express in sshd_config.
# account  required     pam_access.so

# Standard Un*x authorization.
account    include      common-accountt

# Standard Un*x session setup and teardown.
session    include      common-session

# Print the message of the day upon successful login.
session    optional     pam_motd.so # [1]

# Print the status of the user's mailbox upon successful login.
session    optional     pam_mail.so standard noenv # [1]

# Set up user limits from /etc/security/limits.conf.
session    required     pam_limits.so

# Standard Un*x password updating.
password   include      common-password
linuxsshpasswordsshd
14
marc

チャットでは、システムが従来の（シャドウではない）パスワードストレージと従来のUnixパスワードハッシュアルゴリズムを使用していることがわかりました。どちらも、今日のセキュリティ環境では不十分な選択です。

従来のパスワードハッシュアルゴリズムは、パスワードの最初の8文字のみを保存して比較するため、元の質問で気付いた動作を説明しています。

投稿されたsshd出力には次の行が含まれます。

Could not get shadow information for user

これは、このシステムの少なくともsshd（またはPAM Unixパスワードストレージライブラリ）にシャドウパスワード機能が含まれていることを意味すると思いますが、何らかの理由で、システムベンダーが使用しないことを選択しています。

32
telcoM

BusyBoxベースのディストリビューションでは、通常Yoctoでビルドされたディストリビューションがそうですが、BusyBox構成で適切なオプションを有効にすることにより、おそらくこれを修正できます。このソリューションは、レシピがあり、独自の適応OSイメージ、または少なくとも適切なBusyBoxバイナリを構築できることを前提としています。また、（libcから）利用可能な高度な暗号化ハッシュアルゴリズム（少なくともSHA-256、より良いSHA-512）も必要です。

BusyBox構成で、設定

  • ログイン/パスワード管理ユーティリティ
    • シャドウパスワードのサポート→有効
    • 内部暗号化関数を使用する→無効
    • デフォルトのパスワード暗号化方式→sha512またはsha256

さらに /etc/passwd および /etc/shadow 適応する必要があります。 g。拡張BusyBoxビルドのコマンドラインツール（passwd、mkpasswd、chpasswd）を使用するか、イメージビルド中に EXTRA_USERS_PARAMS ：

EXTRA_USERS_PARAMS = " \
    usermod -p '\$6\$<salt>\$<encrypted_pwd>' root; \
    useradd -m -s /bin/sh -G … -u … -p '…' <username>; \
    "
7
Murphy

/etc/shadowファイルの場合、そのファイル内の個々のパスワードで異なるハッシュ方式を使用することは可能です。

過去数年間のデフォルトスキームはSHA-2の多くの反復を使用するスキームですが、従来のDESに基づくスキームを使用していただけでなく、パスワードに含めることができる文字は何ですか。ただし、パスワードの最初の8文字のみが処理時に含まれていました。したがって、30文字のパスワードを入力できましたが、最初の8文字だけがパスワードの検証に使用されました。

それ以降にシステムをアップグレードした場合でも、パスワードが十分に前に設定されて古い方式を使用している限り、ユーザーがパスワードを変更するまで、その古い方式が引き続き使用されます。パスワードを知らなければ、パスワードハッシュを新しいスキームに変換することはできません。これは、利用可能な新しいパスワードハッシュスキームを利用するために、自分のパスワードを時々変更するもう1つの理由です。

Linuxおよびその他のUnixでのパスワードハッシュ方式に関する記事は、こちらから入手できます。

https://en.wikipedia.org/wiki/Crypt_（C）

各ユーザーのパスワードが使用しているスキームを確認したい場合は、/etc/shadowとパスワードフィールドを確認します。

  • 最新のSHA-2ベースのパスワードハッシュは「$ 5」または「$ 6」で始まり、長くなります。

  • そして、古いDESベースのパスワードハッシュはドル記号で始まっておらず、より短いです。

  • Linuxでは、「$ 1」で始まり、その中間の長さのMD5ベースのハッシュも使用できます。

Crypt記事にリストされている他のスキームは、通常Linuxディストリビューションでは使用されていません。

0
trr