web-dev-qa-db-ja.com

Xconfig xrandr badmatch

最近、OSを最小限にインストールしましたが、モニターの解像度の設定中に予期しないエラーが発生しました。それは非常に古い問題のように思えますが、今回は何か他のものがあります（私は思う）。

  1. デスクトップ環境をインストールするには：apt-get update、apt-get install xorg-core xserver-xorg-core gnome-core gdm3

  2. グラフィックグリバーをインストールするapt-get install build-essential nvidia-kernel-common linux-headers-$(uname -r)、./NVIDIA-Linux-x86_64-304.64.run上記の手順は、すべてが正しく行われているようです。

  3. 解像度を設定するには：cvt 1440 900、xrandr --newmode xxx、xrandr --addmode VGA-0 xxx

それから私はそのエラーを得ました：

X Error of failed request:  BadMatch (invalid parameter attributes)
Major opcode of failed request:  153 (RANDR).
Minor opcode of failed request:  18 (RRAddOutputMode).
Serial number of failed request:  29.
Current serial number in output stream:  30

Uに必要な情報がわからないので、

グラフィックカードモデル：nvidia gt630。

グラフィックカードのメモリサイズ：512M ddr5。

モニター：phlips 190cw（1440x900、Windowsで正常に動作します）。これはWindowsでの私の設定です（モニタードライバーをインストールしていないため、Windowsはそれを190g6として認識します）

enter image description here

xrandr出力

Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
VGA-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
   1280x1024      60.0*+   75.0  
   1024x768       75.0     70.1     60.0  
   800x600        75.0     72.2     60.3     56.2  
   640x480        75.0     72.8     59.9  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
  1440x900_60.00 (0x29f)  106.5MHz
        h: width  1440 start 1528 end 1672 total 1904 skew    0 clock   55.9KHz
        v: height  900 start  903 end  909 total  934           clock   59.9Hz

lshw -c video出力

*-display               
   description: VGA compatible controller
   product: nVidia Corporation
   vendor: nVidia Corporation
   physical id: 0
   bus info: pci@0000:05:00.0
   version: a1
   width: 64 bits
   clock: 33MHz
   capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
   configuration: driver=nvidia latency=0
   resources: irq:16 memory:f6000000-f6ffffff memory:e0000000-efffffff(prefetchable) memory:f0000000-f1ffffff(prefetchable) ioport:d000(size=128) memory:f7000000-f707ffff(prefetchable)

xorg.conf

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Edidを取得しようとしました：apt-get install read-edid、Sudo get-edid | parse-edid

しかし、このエラーが発生しました：

get-edid: get-edid version 2.0.0

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
    Function supported
    Call successful

    VBE version 300
    VBE string at 0x11100 "NVIDIA"

VBE/DDC service about to be called
    Report DDC capabilities

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
    Function supported
    Call successful

    Monitor and video card combination does not support DDC1 transfers
    Monitor and video card combination does not support DDC2 transfers
    0 seconds per 128 byte EDID block transfer
    Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
    Read EDID

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
    Function supported
    Call failed

The EDID data should not be trusted as the VBE call failed
Error: output block unchanged

nvidia-settingsを使用して解像度を1440x900に強制しようとしました。再起動後、解像度は1440X1024に変更されました（nvidia-settingsはxorg.conf Option "metamodes" "1440x1024 +0+0"に行を追加しました）。画面はそのように水平スクロール可能になります：

enter image description here

また、edid.bin（nvidia-settingsを使用して）を抽出し、Option "CustomEDID" "DFP-1:/etc/X11/edid.bin"のSection "Device"をxorg.confに追加しようとしました。 素晴らしい投稿Fixing Ugly DVI/HDMI Displays due to EDID bugs on nVidia driversのおかげ ですが、残念ながら機能しません。

更新：var/log/Xorg.0.log

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.0-1-AMD64 x86_64 Debian
Current Operating System: Linux xx 2.6.32-5-AMD64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-AMD64 root=UUID=df3ea9ad-faaf-4918-a213-5a673080e935 ro quiet
Build Date: 29 October 2011  06:58:14PM
xorg-server 2:1.7.7-14 (Julien Cristau <[email protected]>) 
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan  8 23:09:08 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:5:0:0) 10de:0f00:0000:0000 nVidia Corporation rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module  304.64  Tue Oct 30 11:18:32 PDT 2012
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  304.64  Tue Oct 30 10:59:51 PDT 2012
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "CustomEDID" "DFP-0:/home/teifi/edid.bin"
(**) Jan 08 23:09:09 NVIDIA(0): Enabling 2D acceleration
(II) Jan 08 23:09:10 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:10 NVIDIA(GPU-0):     Vision stereo.
(II) Jan 08 23:09:10 NVIDIA(0): NVIDIA GPU GeForce GT 630 (GF108) at PCI:5:0:0 (GPU-0)
(--) Jan 08 23:09:10 NVIDIA(0): Memory: 1048576 kBytes
(--) Jan 08 23:09:10 NVIDIA(0): VideoBIOS: 70.08.aa.00.00
(II) Jan 08 23:09:10 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Jan 08 23:09:10 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jan 08 23:09:10 NVIDIA(0): Valid display device(s) on GeForce GT 630 at PCI:5:0:0
(--) Jan 08 23:09:10 NVIDIA(0):     CRT-0
(--) Jan 08 23:09:10 NVIDIA(0):     Philips 190G6 (CRT-1) (connected)
(--) Jan 08 23:09:10 NVIDIA(0):     DFP-0
(--) Jan 08 23:09:10 NVIDIA(0):     DFP-1
(--) Jan 08 23:09:10 NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): Philips 190G6 (CRT-1): 480.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): DFP-0: Internal Single Link TMDS
(--) Jan 08 23:09:10 NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
(--) Jan 08 23:09:10 NVIDIA(0): DFP-1: Internal Single Link TMDS
(**) Jan 08 23:09:10 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:10 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:10 NVIDIA(0):     been enabled on all display devices.)
(WW) Jan 08 23:09:10 NVIDIA(0): No valid modes for "CRT-1:1440x900"; removing.
(WW) Jan 08 23:09:10 NVIDIA(0): No valid modes for "CRT-1:1280x800"; removing.
(II) Jan 08 23:09:10 NVIDIA(0): Validated MetaModes:
(II) Jan 08 23:09:10 NVIDIA(0):     "CRT-1:1024x768"
(II) Jan 08 23:09:10 NVIDIA(0):     "CRT-1:800x600"
(II) Jan 08 23:09:10 NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) Jan 08 23:09:10 NVIDIA(0): DPI set to (68, 65); computed from "UseEdidDpi" X config
(--) Jan 08 23:09:10 NVIDIA(0):     option
(--) Depth 24 pixmap format is 32 bpp
(II) Jan 08 23:09:10 NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
(II) Jan 08 23:09:10 NVIDIA:     access.
(II) Jan 08 23:09:10 NVIDIA(0): Setting mode "CRT-1:1024x768"
(II) Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "TwinView" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2)
(**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event2"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Found relative axes
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(II) USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device PC Speaker (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:12 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:09:12 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:12 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:12 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:12 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:09:12 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:12 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:12 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:09:12 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:12 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:09:12 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:12 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:12 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:09:59 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:09:59 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:09:59 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:09:59 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:09:59 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:10:00 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:10:00 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:10:00 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:10:00 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:10:00 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:10:00 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:10:00 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:10:00 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:10:00 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:10:00 NVIDIA(0):     been enabled on all display devices.)
(II) Jan 08 23:10:00 NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1280x1024 +0+0"
(II) Jan 08 23:10:01 NVIDIA(GPU-0): Display (Philips 190G6 (CRT-1)) does not support NVIDIA 3D
(II) Jan 08 23:10:01 NVIDIA(GPU-0):     Vision stereo.
(**) Jan 08 23:10:01 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Jan 08 23:10:01 NVIDIA(0):     device Philips 190G6 (CRT-1) (Using EDID frequencies has
(**) Jan 08 23:10:01 NVIDIA(0):     been enabled on all display devices.)

どんな助けも大歓迎です。ありがとうございました

nvidiaxorgresolutionxrandr
14
Teifi

この「BadMatch」問題がありました。

 X Error of failed request:  BadMatch (invalid parameter attributes)
   Major opcode of failed request:  140 (RANDR)
   Minor opcode of failed request:  18 (RRAddOutputMode)
   Serial number of failed request:  27
   Current serial number in output stream:  28

xorg.confを手動で編集して解決しました。このモニターセクションでこの行を追加または修正します。

HorizSync  30-82
VertRefresh  56-76

保存して再起動し、出来上がり。解像度は大丈夫です。 D-subからDVIへの変換アダプタを使用しているため、問題があると思いました。ディスプレイにはD-Subコネクタがあり、カードはDVIでした。問題は、クローズドソースのnVidiaドライバーのみにありました。ヌーボーは大丈夫だった。

11
user218335

方法1-xorg.confをクリアする

/etc/X11/xorg.confを削除して、xウィンドウを再起動し、nvidia-settingsで解像度を再度設定してください。通常、自動検出はDVIケーブルで完全に機能します。しかし、モニターの仕様をオンラインで見つけることができないため、DVIコネクタがあるかどうかわかりません。

方法2-xorg.orgモード行

Modes行をScreenセクションに追加してみてください

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes    "1440x900" "1280x800" "1024x768" "800x600"
    EndSubSection
EndSection

追加

X WindowとNvidiaドライバーを更新する

あなたのバージョン

X Window version

X.Org X Server 1.7.7
Release Date: 2010-05-04

(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0

Ubuntu 12.04

X.Org X Server 1.11.3
Release Date: 2011-12-16

[ 79635.469] (II) Module ABI versions:
[ 79635.469]     X.Org ANSI C Emulation: 0.4
[ 79635.469]     X.Org Video Driver: 11.0
[ 79635.469]     X.Org XInput driver : 16.0
[ 79635.469]     X.Org Server Extension : 6.0

現在のNvidiaドライバー ここ 。

xorg.confモニターセクション（ ソース ）

Section "Monitor"
    Identifier "monitor0"
    VendorName "Plug'n Play"
    ModelName "Philips 190CW"
    HorizSync 30-83
    VertRefresh 55-75

    # Monitor preferred modeline (59.9 Hz vsync, 55.9 kHz hsync, ratio 16/10, 91 dpi)
    ModeLine "1440x900" 106.5 1440 1520 1672 1904 900 903 909 934 +hsync -vsync

    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630

    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_120"  229.75  1440 1552 1712 1984  900 901 904 965  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_100"  187.55  1440 1544 1704 1968  900 901 904 953  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_85"  156.79  1440 1536 1696 1952  900 901 904 945  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_75"  136.49  1440 1536 1688 1936  900 901 904 940  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_60"  106.47  1440 1520 1672 1904  900 901 904 932  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_50"  87.41  1440 1512 1664 1888  900 901 904 926  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_120"  181.21  1280 1376 1520 1760  800 801 804 858  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_100"  147.89  1280 1376 1512 1744  800 801 804 848  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_85"  123.38  1280 1368 1504 1728  800 801 804 840  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_75"  107.21  1280 1360 1496 1712  800 801 804 835  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_60"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync

    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_50"  68.56  1280 1336 1472 1664  800 801 804 824  -HSync +Vsync
EndSection
2
John Siu

オプション「ModeValidation」「NoDFPNativeResolutionCheck、NoVirtualSizeCheck、NoMaxPClkCheck、NoHorizSyncCheck、NoVertRefreshCheck、NoWidthAlignmentCheck」をXorg.confファイルに追加しました。

私には問題ありません。

0
user3189661