web-dev-qa-db-ja.com

dfがRAID10アレイの半分のサイズしか表示しないのはなぜですか？

150Gのストレージを作成するために、4つの75Gドライブを使用してRAID10アレイを作成しました。
すべてが終了した後（最初の同期を含む）、指定されたマウントポイントに73Gストレージしか表示されなかったdf -hの出力を除いて、すべてが良好に見えました。

詳細：

  • マシンは、AmazonEC2上のm1.largeUbuntu11.10インスタンスです。
  • 4つのドライブはEBSドライブで、それぞれのサイズは75Gです。
  • RAID10アレイは、次のスクリプトを使用して作成されました。

-

#!/bin/sh

disk1="/dev/sdh1"
disk2="/dev/sdh2"
disk3="/dev/sdh3"
disk4="/dev/sdh4"

echo "*** Verifying existence of 4 volumes $disk1, $disk2, $disk3 and $disk4"
if [ -b "$disk1" -a -b "$disk2" -a -b "$disk3" -a -b "$disk4" ]; then
    echo "# Found expected block devices."
else
    echo "!!! Did not find expected block devices.  Error."
    exit -1
fi
until read -p "??? - How big (in GB) are the disks (They should be the same size)?  " disk_size && [ $disk_size ]; do
    echo "Please enter a disk size."
done 

lv_size=$(echo "scale=2; $disk_size * 2.0" | bc)
echo "*** Assuming a per disk size of $disk_size gigs, will create a logical volume of $lv_size gigs, with $lv_size reserved for snapshots"

echo "*** Partitioning disks..."

echo "~ Partitioning $disk1"
echo ',,L' | sfdisk $disk1
echo "~ Partitioning $disk2"
echo ',,L' | sfdisk $disk2
echo "~ Partitioning $disk3"
echo ',,L' | sfdisk $disk3
echo "~ Partitioning $disk4"
echo ',,L' | sfdisk $disk4

sleep 6
echo "*** Creating /dev/md0 as a RAID 10"

/sbin/mdadm /dev/md0 --create --level=10 --raid-devices=4 $disk1 $disk2 $disk3 $disk4 

echo " ~ Allocating /dev/md0 as a physical volume."

/sbin/pvcreate /dev/md0

echo " ~ Allocating a Volume Group 'mongodb_vg'"

/sbin/vgcreate -s 64M mongodb_vg /dev/md0

echo " ~ Creating a Logical Volume 'mongodb_lv'"

num_extents=$(echo "$disk_size * 1000 / 64" | bc)

/sbin/lvcreate -l $num_extents -nmongodb_lv mongodb_vg

echo " ~ Formatting the new volume (/dev/mongodb_vg/mongodb_lv) with EXT4"

/sbin/mkfs.ext4 /dev/mongodb_vg/mongodb_lv

echo " ~ Done! Go ahead and mount the new filesystem.  Suggested FStab: "
echo " /dev/mongodb_vg/mongodb_lv /data ext4 defaults,noatime 0 0"

これは私が得た出力です：

*** Verifying existence of 4 volumes /dev/xvdh1, /dev/xvdh2, /dev/xvdh3 and /dev/xvdh4
# Found expected block devices.
??? - How big (in GB) are the disks (They should be the same size)?  75
*** Assuming a per disk size of 75 gigs, will create a logical volume of 150.0 gigs, with 150.0 reserved for snapshots
*** Partitioning disks...
~ Partitioning /dev/xvdh1
Checking that no-one is using this disk right now ...
BLKRRPART: Invalid argument
OK

Disk /dev/xvdh1: 9790 cylinders, 255 heads, 63 sectors/track

sfdisk: ERROR: sector 0 does not have an msdos signature
 /dev/xvdh1: unrecognized partition table type
Old situation:   
No partitions found
New situation:   
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/xvdh1p1          0+   9789    9790-  78638174+  83  Linux
/dev/xvdh1p2          0       -       0          0    0  Empty
/dev/xvdh1p3          0       -       0          0    0  Empty
/dev/xvdh1p4          0       -       0          0    0  Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Invalid argument

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)  
~ Partitioning /dev/xvdh2
Checking that no-one is using this disk right now ...
BLKRRPART: Invalid argument
OK

Disk /dev/xvdh2: 9790 cylinders, 255 heads, 63 sectors/track

sfdisk: ERROR: sector 0 does not have an msdos signature
 /dev/xvdh2: unrecognized partition table type
   Old situation:   
No partitions found
New situation:   
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/xvdh2p1          0+   9789    9790-  78638174+  83  Linux
/dev/xvdh2p2          0       -       0          0    0  Empty
/dev/xvdh2p3          0       -       0          0    0  Empty
/dev/xvdh2p4          0       -       0          0    0  Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Invalid argument

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)  
~ Partitioning /dev/xvdh3
Checking that no-one is using this disk right now ...
BLKRRPART: Invalid argument
OK

Disk /dev/xvdh3: 9790 cylinders, 255 heads, 63 sectors/track

sfdisk: ERROR: sector 0 does not have an msdos signature
 /dev/xvdh3: unrecognized partition table type
Old situation:   
No partitions found
New situation:   
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/xvdh3p1          0+   9789    9790-  78638174+  83  Linux
/dev/xvdh3p2          0       -       0          0    0  Empty
/dev/xvdh3p3          0       -       0          0    0  Empty
/dev/xvdh3p4          0       -       0          0    0  Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Invalid argument
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)  
~ Partitioning /dev/xvdh4
Checking that no-one is using this disk right now ...
BLKRRPART: Invalid argument
OK

Disk /dev/xvdh4: 9790 cylinders, 255 heads, 63 sectors/track

sfdisk: ERROR: sector 0 does not have an msdos signature
 /dev/xvdh4: unrecognized partition table type
Old situation:   
No partitions found
New situation:   
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

   Device Boot Start     End   #cyls    #blocks   Id  System
/dev/xvdh4p1          0+   9789    9790-  78638174+  83  Linux
/dev/xvdh4p2          0       -       0          0    0  Empty
/dev/xvdh4p3          0       -       0          0    0  Empty
/dev/xvdh4p4          0       -       0          0    0  Empty
Warning: no primary partition is marked bootable (active)
This does not matter for LILO, but the DOS MBR will not boot this disk.
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Invalid argument

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)  
*** Creating /dev/md0 as a RAID 10
mdadm: partition table exists on /dev/xvdh1 but will be lost or
       meaningless after creating array
mdadm: partition table exists on /dev/xvdh2 but will be lost or
       meaningless after creating array
mdadm: partition table exists on /dev/xvdh3 but will be lost or
       meaningless after creating array
mdadm: partition table exists on /dev/xvdh4 but will be lost or
       meaningless after creating array
Continue creating array? y
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
 ~ Allocating /dev/md0 as a physical volume.

  Physical volume "/dev/md0" successfully created
 ~ Allocating a Volume Group 'mongodb_vg'
  Volume group "mongodb_vg" successfully created
 ~ Creating a Logical Volume 'mongodb_lv'
  Logical volume "mongodb_lv" created
 ~ Formatting the new volume (/dev/mongodb_vg/mongodb_lv) with EXT4
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux   
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=128 blocks, Stripe width=256 blocks
4800512 inodes, 19185664 blocks
959283 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
586 block groups 
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 36 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
 ~ Done! Go ahead and mount the new filesystem.  Suggested FStab:
 /dev/mongodb_vg/mongodb_lv /data ext4 defaults,noatime 0 0

これは、df -hの関連する出力です。

Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/mongodb_vg-mongodb_lv
                       73G  180M   69G   1% /ebsRaid

これはmdadm --detail /dev/md0の出力です

/dev/md0:
        Version : 1.2
  Creation Time : Wed Feb 29 10:14:39 2012
     Raid Level : raid10
     Array Size : 157283328 (150.00 GiB 161.06 GB)
  Used Dev Size : 78641664 (75.00 GiB 80.53 GB)
   Raid Devices : 4
  Total Devices : 4
    Persistence : Superblock is persistent

    Update Time : Wed Feb 29 13:21:49 2012
          State : clean
 Active Devices : 4
Working Devices : 4
 Failed Devices : 0
  Spare Devices : 0

         Layout : near=2
     Chunk Size : 512K

           Name : my.site.com:0  (local to Host my.site.com)
           UUID : CENSORED
         Events : 19

    Number   Major   Minor   RaidDevice State
       0     202      113        0      active sync   /dev/xvdh1
       1     202      114        1      active sync   /dev/xvdh2
       2     202      115        2      active sync   /dev/xvdh3
       3     202      116        3      active sync   /dev/xvdh4

これはcat /proc/mdstatの出力です。

Personalities : [raid10] 
md0 : active raid10 xvdh4[3] xvdh3[2] xvdh2[1] xvdh1[0]
      157283328 blocks super 1.2 512K chunks 2 near-copies [4/4] [UUUU]

unused devices: <none>

編集1：

これは、lvdisplay-mの出力です。

  --- Logical volume ---
  LV Name                /dev/mongodb_vg/mongodb_lv
  VG Name                mongodb_vg
  LV UUID                SEpGth-cXd3-ZFhy-XLHo-T5pV-gEd1-Tgancs
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                73.19 GiB
  Current LE             1171
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     4096
  Block device           252:0

  --- Segments ---
  Logical extent 0 to 1170:
    Type                linear
    Physical volume     /dev/md0
    Physical extents    0 to 1170

編集2：

これはvgdisplayの出力です。

  --- Volume group ---
  VG Name               mongodb_vg
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  2
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                1
  Open LV               1
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               149.94 GiB
  PE Size               64.00 MiB
  Total PE              2399
  Alloc PE / Size       1171 / 73.19 GiB
  Free  PE / Size       1228 / 76.75 GiB
  VG UUID               CENSORED
raidraid10df
9
Doron

ボリュームグループは、そのために作成されたエクステント全体を使用していません。

VG Size               149.94 GiB
PE Size               64.00 MiB
Total PE              2399
Alloc PE / Size       1171 / 73.19 GiB
Free  PE / Size       1228 / 76.75 GiB

次のコマンドを使用して、エクステントをさらに追加できます。

lvextend -l +100%FREE /dev/mongodb_vg/mongodb_lv /dev/md0

これを入力する前にMANページをお読みください

このコマンドは、ボリュームグループを拡張して、残っているすべてのFREEエクステントを使用します（一部のエクステントを空けておきたい場合は、lessを選択することもできます）。これを行うには、md0のエクステントを利用します。

次に、以下を使用してオンラインでパーティションのサイズを変更できます。

resize2fs  /dev/mongodb_vg/mongodb_lv

そして、それはオンラインでサイズ変更していると言うべきです。これで問題は解決すると思いますが、manページを読んで、何をしているかを理解してから試してください。私はあなたがあなたのディスクをゴミ箱に捨てる責任はありません。

余談ですが、EBS上のRAID、次にその上のlvmは、ディスクを仮想化する不必要なレベルのようです。 RAIDを追加しても、データのパフォーマンスや安全性は向上しません。私が正しく覚えていれば、LVMはすでにミラーリング/ストライピングを行っています。技術的にはLVMon RAID on LVM on RAID ad infinitumを実行できますが、そうすることで多くの利益が得られるかどうかはわかりません（ただし、これについて間違っていると指摘されてうれしいです）。

6
webtoe