T-SQLを使用したレプリケーションモニター情報

Question

以下の画像は、現在調査中のトランザクションレプリケーションの問題を示しています。

イメージはレプリケーションモニターから取得されます。

T-SQLを使用してこの情報を取得するにはどうすればよいですか？

Answer 1

いくつかのオンライン検索を行った後、私はあなたが必要なものを見つけました、私の答えがあなたを助けることを願っています。

回答1

注意：

トランザクションおよびトランザクションのピアツーピア複製でのみ機能します

トランザクションレプリケーションのステータスとパブリケーションおよびサブスクリプションのパフォーマンスを監視するために使用できるT-SQLスクリプト。

以下のスクリプトを実行する前に考慮すべき事項

ディストリビューションデータベースとマスターデータベース内の次のテーブルに対する権限が必要です

• MSdistribution_status
• MSdistribution_agents
• MSArticles
• MSreplication_monitordata
• MSdistribution_history
• サーバー

---

    USE [distribution]

    IF OBJECT_ID('Tempdb.dbo.#ReplStats') IS NOT NULL  
    DROP TABLE #ReplStats 

    CREATE TABLE [dbo].[#ReplStats](
    [DistributionAgentName] [nvarchar](100) NOT NULL,
    [DistributionAgentStartTime] [datetime] NOT NULL,
    [DistributionAgentRunningDurationInSeconds] [int] NOT NULL,
    [IsAgentRunning] [bit] NULL,
    [ReplicationStatus] [varchar](14) NULL,
    [LastSynchronized] [datetime] NOT NULL,
    [Comments] [nvarchar](max) NOT NULL,
    [Publisher] [sysname] NOT NULL,
    [PublicationName] [sysname] NOT NULL,
    [PublisherDB] [sysname] NOT NULL,
    [Subscriber] [nvarchar](128) NULL,
    [SubscriberDB] [sysname] NULL,
    [SubscriptionType] [varchar](64) NULL,
    [DistributionDB] [sysname] NULL,
    [Article] [sysname] NOT NULL,
    [UndelivCmdsInDistDB] [int] NULL,
    [DelivCmdsInDistDB] [int] NULL,
    [CurrentSessionDeliveryRate] [float] NOT NULL,
    [CurrentSessionDeliveryLatency] [int] NOT NULL,
    [TotalTransactionsDeliveredInCurrentSession] [int] NOT NULL,
    [TotalCommandsDeliveredInCurrentSession] [int] NOT NULL,
    [AverageCommandsDeliveredInCurrentSession] [int] NOT NULL,
    [DeliveryRate] [float] NOT NULL,
    [DeliveryLatency] [int] NOT NULL,
    [TotalCommandsDeliveredSinceSubscriptionSetup] [int] NOT NULL,
    [SequenceNumber] [varbinary](16) NULL,
    [LastDistributerSync] [datetime] NULL,
    [Retention] [int] NULL,
    [WorstLatency] [int] NULL,
    [BestLatency] [int] NULL,
    [AverageLatency] [int] NULL,
    [CurrentLatency] [int] NULL
    ) ON [PRIMARY]


    INSERT INTO #ReplStats 
    SELECT da.[name] AS [DistributionAgentName]
    ,dh.[start_time] AS [DistributionAgentStartTime]
    ,dh.[duration] AS [DistributionAgentRunningDurationInSeconds]
    ,md.[isagentrunningnow] AS [IsAgentRunning]
    ,CASE md.[status]
    WHEN 1 THEN '1 - Started'
    WHEN 2 THEN '2 - Succeeded'
    WHEN 3 THEN '3 - InProgress'
    WHEN 4 THEN '4 - Idle'
    WHEN 5 THEN '5 - Retrying'
    WHEN 6 THEN '6 - Failed'
    END AS [ReplicationStatus]
    ,dh.[time] AS [LastSynchronized]
    ,dh.[comments] AS [Comments]
    ,md.[publisher] AS [Publisher]
    ,da.[publication] AS [PublicationName]
    ,da.[publisher_db] AS [PublisherDB]
    ,CASE 
    WHEN da.[anonymous_subid] IS NOT NULL 
    THEN UPPER(da.[subscriber_name])
    ELSE UPPER (s.[name]) END AS [Subscriber]
    ,da.[subscriber_db] AS [SubscriberDB]
    ,CASE da.[subscription_type]
    WHEN '0' THEN 'Push'  
    WHEN '1' THEN 'Pull'  
    WHEN '2' THEN 'Anonymous'  
    ELSE CAST(da.[subscription_type] AS [varchar](64)) END AS [SubscriptionType]
    ,md.[distdb] AS [DistributionDB]
    ,ma.[article]    AS [Article]
    ,ds.[UndelivCmdsInDistDB] 
    ,ds.[DelivCmdsInDistDB]
    ,dh.[current_delivery_rate] AS [CurrentSessionDeliveryRate]
    ,dh.[current_delivery_latency] AS [CurrentSessionDeliveryLatency]
    ,dh.[delivered_transactions] AS [TotalTransactionsDeliveredInCurrentSession]
    ,dh.[delivered_commands] AS [TotalCommandsDeliveredInCurrentSession]
    ,dh.[average_commands] AS [AverageCommandsDeliveredInCurrentSession]
    ,dh.[delivery_rate] AS [DeliveryRate]
    ,dh.[delivery_latency] AS [DeliveryLatency]
    ,dh.[total_delivered_commands] AS [TotalCommandsDeliveredSinceSubscriptionSetup]
    ,dh.[xact_seqno] AS [SequenceNumber]
    ,md.[last_distsync] AS [LastDistributerSync]
    ,md.[retention] AS [Retention]
    ,md.[worst_latency] AS [WorstLatency]
    ,md.[best_latency] AS [BestLatency]
    ,md.[avg_latency] AS [AverageLatency]
    ,md.[cur_latency] AS [CurrentLatency]
    FROM [distribution]..[MSdistribution_status] ds 
    INNER JOIN [distribution]..[MSdistribution_agents] da
    ON da.[id] = ds.[agent_id]                          
    INNER JOIN [distribution]..[MSArticles] ma 
    ON ma.publisher_id = da.publisher_id 
    AND ma.[article_id] = ds.[article_id]
    INNER JOIN [distribution]..[MSreplication_monitordata] md
    ON [md].[job_id] = da.[job_id]
    INNER JOIN [distribution]..[MSdistribution_history] dh
    ON [dh].[agent_id] = md.[agent_id] 
    AND md.[agent_type] = 3
    INNER JOIN [master].[sys].[servers]  s
    ON s.[server_id] = da.[subscriber_id] 
    --Created WHEN your publication has the immediate_sync property set to true. This property dictates 
    --whether snapshot is available all the time for new subscriptions to be initialized. 
    --This affects the cleanup behavior of transactional replication. If this property is set to true, 
    --the transactions will be retained for max retention period instead of it getting cleaned up
    --as soon as all the subscriptions got the change. 
    WHERE da.[subscriber_db] <> 'virtual' 
    AND da.[anonymous_subid] IS NULL
    AND dh.[start_time] = (SELECT TOP 1 start_time
                    FROM [distribution]..[MSdistribution_history] a
                    JOIN [distribution]..[MSdistribution_agents] b
                    ON a.[agent_id] = b.[id] AND b.[subscriber_db] <> 'virtual'
                    WHERE [runstatus] <> 1
                    ORDER BY [start_time] DESC)
    AND dh.[runstatus] <> 1

    SELECT 'Transactional Replication Summary' AS [Comments];
    SELECT [DistributionAgentName]
    ,[DistributionAgentStartTime]
    ,[DistributionAgentRunningDurationInSeconds]
    ,[IsAgentRunning]
    ,[ReplicationStatus]
    ,[LastSynchronized]
    ,[Comments]
    ,[Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]
    ,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
    ,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
    ,[CurrentSessionDeliveryRate]
    ,[CurrentSessionDeliveryLatency]
    ,[TotalTransactionsDeliveredInCurrentSession]
    ,[TotalCommandsDeliveredInCurrentSession]
    ,[AverageCommandsDeliveredInCurrentSession]
    ,[DeliveryRate]
    ,[DeliveryLatency]
    ,[TotalCommandsDeliveredSinceSubscriptionSetup]
    ,[SequenceNumber]
    ,[LastDistributerSync]
    ,[Retention]
    ,[WorstLatency]
    ,[BestLatency]
    ,[AverageLatency]
    ,[CurrentLatency]
    FROM #ReplStats
    GROUP BY [DistributionAgentName]
    ,[DistributionAgentStartTime]
    ,[DistributionAgentRunningDurationInSeconds]
    ,[IsAgentRunning]
    ,[ReplicationStatus]
    ,[LastSynchronized]
    ,[Comments]
    ,[Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]
    ,[CurrentSessionDeliveryRate]
    ,[CurrentSessionDeliveryLatency]
    ,[TotalTransactionsDeliveredInCurrentSession]
    ,[TotalCommandsDeliveredInCurrentSession]
    ,[AverageCommandsDeliveredInCurrentSession]
    ,[DeliveryRate]
    ,[DeliveryLatency]
    ,[TotalCommandsDeliveredSinceSubscriptionSetup]
    ,[SequenceNumber]
    ,[LastDistributerSync]
    ,[Retention]
    ,[WorstLatency]
    ,[BestLatency]
    ,[AverageLatency]
    ,[CurrentLatency]

    SELECT 'Transactional Replication Summary Details' AS [Comments];
    SELECT [Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Article]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]
    ,SUM([UndelivCmdsInDistDB]) AS [UndelivCmdsInDistDB]
    ,SUM([DelivCmdsInDistDB]) AS [DelivCmdsInDistDB]
    FROM #ReplStats
    GROUP BY [Publisher]
    ,[PublicationName]
    ,[PublisherDB]
    ,[Article]
    ,[Subscriber]
    ,[SubscriberDB]
    ,[SubscriptionType]
    ,[DistributionDB]

---

回答2

Script_2が [〜＃〜] msdn [〜＃〜] に見つかりました

    --First you find the distributor servername using the below running in publisher
    Use master
    EXEC sp_helpdistributor;

    --Then you can run the below to find the type (use distributor database)

    SELECT 
    (CASE  
    WHEN mdh.runstatus =  '1' THEN 'Start - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '2' THEN 'Succeed - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '3' THEN 'InProgress - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '4' THEN 'Idle - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '5' THEN 'Retry - '+cast(mdh.runstatus as varchar)
    WHEN mdh.runstatus =  '6' THEN 'Fail - '+cast(mdh.runstatus as varchar)
    ELSE CAST(mdh.runstatus AS VARCHAR)
    END) [Run Status], 
    mda.subscriber_db [Subscriber DB], 
    mda.publication [PUB Name],
    CONVERT(VARCHAR(25),mdh.[time]) [LastSynchronized],
    und.UndelivCmdsInDistDB [UndistCom], 
    mdh.comments [Comments], 
    'select * from distribution.dbo.msrepl_errors (nolock) where id = ' + CAST(mdh.error_id AS VARCHAR(8)) [Query More Info],
    mdh.xact_seqno [SEQ_NO],
    (CASE  
    WHEN mda.subscription_type =  '0' THEN 'Push' 
    WHEN mda.subscription_type =  '1' THEN 'Pull' 
    WHEN mda.subscription_type =  '2' THEN 'Anonymous' 
    ELSE CAST(mda.subscription_type AS VARCHAR)
    END) [SUB Type],

    mda.publisher_db+' - '+CAST(mda.publisher_database_id as varchar) [Publisher DB],
    mda.name [Pub - DB - Publication - SUB - AgentID]
    FROM distribution.dbo.MSdistribution_agents mda 
    LEFT JOIN distribution.dbo.MSdistribution_history mdh ON mdh.agent_id = mda.id 
    JOIN 
    (SELECT s.agent_id, MaxAgentValue.[time], SUM(CASE WHEN xact_seqno > MaxAgentValue.maxseq THEN 1 ELSE 0 END) AS UndelivCmdsInDistDB 
    FROM distribution.dbo.MSrepl_commands t (NOLOCK)  
    JOIN distribution.dbo.MSsubscriptions AS s (NOLOCK) ON (t.article_id = s.article_id AND t.publisher_database_id=s.publisher_database_id ) 
    JOIN 
    (SELECT hist.agent_id, MAX(hist.[time]) AS [time], h.maxseq  
    FROM distribution.dbo.MSdistribution_history hist (NOLOCK) 
    JOIN (SELECT agent_id,ISNULL(MAX(xact_seqno),0x0) AS maxseq 
    FROM distribution.dbo.MSdistribution_history (NOLOCK)  
    GROUP BY agent_id) AS h  
    ON (hist.agent_id=h.agent_id AND h.maxseq=hist.xact_seqno) 
    GROUP BY hist.agent_id, h.maxseq 
    ) AS MaxAgentValue 
    ON MaxAgentValue.agent_id = s.agent_id 
    GROUP BY s.agent_id, MaxAgentValue.[time] 
    ) und 
    ON mda.id = und.agent_id AND und.[time] = mdh.[time] 
    where mda.subscriber_db<>'virtual' -- created when your publication has the immediate_sync property set to true. This property dictates whether snapshot is available all the time for new subscriptions to be initialized. This affects the cleanup behavior of transactional replication. If this property is set to true, the transactions will be retained for max retention period instead of it getting cleaned up as soon as all the subscriptions got the change.
    --and mdh.runstatus='6' --Fail
    --and mdh.runstatus<>'2' --Succeed
    order by mdh.[time]

---

回答3

スクリプトはエージェントジョブとして SimpleTalk TSQLに掲載されています。

ステップ1

サブスクライバサーバにインストールされているDBAデータベースに作成します。テーブルを作成するコードは次のとおりです。

CREATE TABLE dbo.Replication_Qu_History(
            Subscriber_db varchar(50) NOT NULL,
            Records_In_Que numeric(18, 0) NULL,
            CatchUpTime numeric(18, 0) NULL,
            LogDate datetime NOT NULL,
        CONSTRAINT PK_EPR_Replication_Que_History PRIMARY KEY CLUSTERED
    (
            Subscriber_db ASC, LogDate DESC
    ) ON PRIMARY
    GO

スクリプト1

この表のデータは、監視手順によって入力され、問題を調査するための履歴コンテキストを提供します。しかし、今何が起こっているかを監視するには、さらに多くのことが必要です。

レプリケーションの状態を判断するのに役立つ3つの点があります。

• レプリケーション関連のジョブのステータス
• カウンターDist：Delivery Latencyによって測定された待ち時間（特に配布待ち時間）

• サブスクリプションで保留中の未解決のコマンドの数

  DECLARE @cmd NVARCHAR(max)
  DECLARE @publisher SYSNAME, @publisher_db SYSNAME, @publication SYSNAME, @pubtype INT
  DECLARE @subscriber SYSNAME, @subscriber_db SYSNAME, @subtype INT
  DECLARE @cmdcount INT, @processtime INT
  DECLARE @ParmDefinition NVARCHAR(500)
  DECLARE @JobName SYSNAME
  DECLARE @minutes INT, @threshold INT, @maxCommands INT, @mail CHAR(1) = 'N'
  SET @minutes = 60 --> Define how many minutes latency before you would like to be notified
  SET @maxCommands = 80000  --->  change this to represent the max number of outstanding commands to be proceduresed before notification
  SET @threshold = @minutes * 60
  
  SELECT * INTO #PublisherInfo
  FROM OPENROWSET('SQLOLEDB', 'SERVER=(LOCAL);TRUSTED_CONNECTION=YES;'
  , 'SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublisher')
  
  SELECT @publisher = publisher FROM #PublisherInfo     
  
  SET @cmd = 'SELECT * INTO ##PublicationInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
  ,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelppublication @publisher='
  + @publisher + ''')'
  --select @cmd
  EXEC sp_executesql @cmd
  
  SELECT @publisher_db=publisher_db, @publication=publication, @pubtype=publication_type  FROM ##PublicationInfo
  
  SET @cmd = 'SELECT * INTO ##SubscriptionInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
  ,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorhelpsubscription @publisher='
  + @publisher + ',@publication_type=' + CONVERT(CHAR(1),@pubtype) + ''')'
  --select @cmd
  EXEC sp_executesql @cmd
  
  
  ALTER TABLE ##SubscriptionInfo
  ADD  PendingCmdCount INT NULL,
  EstimatedProcessTime INT NULL
  

  配布ジョブのステータスを確認するには

  DECLARE cur_sub CURSOR READ_ONLY FOR
  SELECT @publisher, s.publisher_db, s.publication, s.subscriber, s.subscriber_db, s.subtype, s.distribution_agentname
  FROM ##SubscriptionInfo s
  
  OPEN cur_sub  
  FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName
  
  WHILE @@FETCH_STATUS = 0  
  BEGIN  
  SET @cmd = 'SELECT @cmdcount=pendingcmdcount, @processtime=estimatedprocesstime FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
  ,''SET FMTONLY OFF EXEC distribution.dbo.sp_replmonitorsubscriptionpendingcmds @publisher=' + @publisher
  + ',@publisher_db=' + @publisher_db + ',@publication=' + @publication
  + ',@subscriber=' + @subscriber + ',@subscriber_db=' + @subscriber_db
  + ',@subscription_type=' + CONVERT(CHAR(1),@subtype) + ';' + ''')'
  SET @ParmDefinition = N'@cmdcount INT OUTPUT,
  @processtime INT OUTPUT'
  --select @cmd
  EXEC sp_executesql @cmd,@ParmDefinition,@cmdcount OUTPUT, @processtime OUTPUT
  
  UPDATE ##SubscriptionInfo
  SET PendingCmdCount = @cmdcount
  , EstimatedProcessTime = @processtime
  WHERE subscriber_db = @subscriber_db
  
  INSERT INTO DBA.dbo.Replication_Que_History
  VALUES(@subscriber_db, @cmdcount, @processtime, GETDATE())
  --  find out if the distribution job with the high number of outstanding commands running or not
  --  if it is running then sometimes stopping and starting the agent fixes the issue
  IF EXISTS(SELECT * FROM tempdb.INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME LIKE '##JobInfo%')
  DROP TABLE ##JobInfo
  
  SET @cmd = 'SELECT * INTO ##JobInfo FROM OPENROWSET(''SQLOLEDB'',''SERVER=(LOCAL);TRUSTED_CONNECTION=YES''
  ,''SET FMTONLY OFF EXEC msdb.dbo.sp_help_job @job_name='''''
  + @JobName + ''''',@job_aspect=''''JOB'''''')'
  EXEC sp_executesql @cmd
  
  IF @cmdcount > @maxCommands OR (@processtime > @threshold AND @cmdcount > 0)
  BEGIN
  IF (SELECT current_execution_status FROM ##JobInfo) = 1 --  This means job is currently executing so stop/start it
  BEGIN
  EXEC distribution.dbo.sp_MSstopdistribution_agent
  @publisher = @publisher
  , @publisher_db = @publisher_db
  , @publication = @publication
  , @subscriber = @subscriber
  , @subscriber_db = @subscriber_db
  WAITFOR DELAY '00:00:05' ---- 5 Second Delay
  SET @mail = 'Y' 
  END
  END   
  --SELECT name, current_execution_status FROM ##JobInfo
  IF (SELECT current_execution_status FROM ##JobInfo) <> 1 -- if the job is not running start it
  BEGIN
  EXEC distribution.dbo.sp_MSstartdistribution_agent
  @publisher = @publisher
  , @publisher_db = @publisher_db
  , @publication = @publication
  , @subscriber = @subscriber
  , @subscriber_db = @subscriber_db
  SET @mail = 'Y'      -- Send email if job has stopped and needed to be restarted
  END   
  DROP TABLE ##JobInfo
  FETCH NEXT FROM cur_sub INTO @publisher, @publisher_db, @publication, @subscriber, @subscriber_db, @subtype, @JobName
  END  
  
  CLOSE cur_sub  
  DEALLOCATE cur_sub
  

  Microsoft提供のプロシージャを実行しますsp_replmonitorsubscriptionpendingcmds

  --system stored procedure to run in distribution database
  execute sp_replmonitorsubscriptionpendingcmds
  --replication publisher server
  @publisher ='PubServer',
  --replication publisher database
  @publisher_db = 'ProdDBPub',
  --replication publication name
  @publication ='ProdDBSub',
  --replication subscriber server
  @subscriber ='SubServer',
  --replication subscriber database
  @subscriber_db ='ProdDBSub1',
  --choose type of subscription you have
  @subscription_type ='1' --0 for Push and 1 for pull
  GO
  

以下のコードでは、アドホック分散クエリサーバー構成オプションを有効にする必要があります。ここでは、前のスクリプト3で問題が見つかった場合に送信するメールを作成しますsp_replmonitorsubscriptionpendingcmds。

        IF @mail = 'Y'
        BEGIN
        DECLARE @msg VARCHAR(MAX) = 'Replication on ' + @@SERVERNAME
        + ' may be experiencing some problems.  Attempts to restart the distribution agent have been made. '
        + 'If this is not the first message like this that you have received within the last hour, please investigate.'
        DECLARE @body NVARCHAR(MAX)
        DECLARE @xml1 NVARCHAR(MAX)
        DECLARE @tab1 NVARCHAR(MAX)
        DECLARE @xml2 NVARCHAR(MAX)
        DECLARE @tab2 NVARCHAR(MAX)

        SET @xml1 = CAST(( SELECT subscriber AS 'td','',subscriber_db AS 'td','',
        latency AS 'td','', PendingCmdCount AS 'td','', EstimatedProcessTime AS 'td'
        FROM  ##SubscriptionInfo s
        FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))

        SET @tab1 ='<html><body><H4>Subscription Information </H4>
        <table border = 1> <tr>
        <th> Subscriber </th> <th> Subscriber Database </th> <th> Latency(seconds)</th>
        <th> Undistributed Commands </th> <th> Estimated Catch Up Time</th></tr>'   
        --  this command gives us the last 10 measurements of latency for each subscriber
        SET @xml2 = CAST(( SELECT s.Subscriber_db AS 'td','', s.Records_In_Que AS 'td','', s.CatchUpTime AS 'td','', CONVERT(CHAR(22),LogDate, 100) AS 'td'
        FROM (SELECT ROW_NUMBER() OVER ( PARTITION BY subscriber_db ORDER BY Logdate DESC ) AS 'RowNumber',
        subscriber_db
        , Records_In_Que
        , CatchUpTime
        , Logdate
        FROM DBA.dbo.Replication_Que_History
        ) s
        WHERE RowNumber <= 8
        FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))

        SET @tab2 ='<br><br><H4>Historical Latency Information </H4>
        <table border = 1>
        <tr>
        <th>Subscriber</th> <th>Undistributed Commands</th> <th> Catch Up Time </th> <th> Date\Time </th></tr>'

        SET @body = @msg + @tab1 + @xml1 + '</table>'
        + @tab2 + @xml2 + '</body></html>'

        DECLARE @to NVARCHAR(200)
        SELECT @to = '' -- INSERT YOUR EMAIL ADDRESS HERE
        EXEC msdb.dbo.sp_send_dbmail
        @body = @body,
        @body_format ='HTML',
        @recipients = @to,
        @subject = 'Possible Replication Problem' ;
        END
        DROP TABLE #PublisherInfo
        DROP TABLE ##PublicationInfo
        DROP TABLE ##SubscriptionInfo

最後のプロセスは、レプリケーションステータステーブルから定期的に行を削除して、データが古くならないようにすることです。

DECLARE @delDate datetime = getdate()-10
  DELETE FROM DBA.dbo.Replication_Que_History
  WHERE LogDate < @deldate

Plsはまた、SQL Server 2005および2008を使用している場合、sp_replmonitorsubscriptionpendingcmdsに問題があることも指摘しました Microsoft Connect

上記の答えのいずれかが不明確な場合は、提供したソースをフォローできます

ありがとう！

Answer 2

すべてのパブリケーションについて、このスクリプトを使用してディストリビューションデータベースからdbo.MSReplication_monitordataテーブルにクエリを実行することで、必要な情報を取得できます。

USE distribution
SELECT status AS ReplicationAgentsStatus 
FROM dbo.MSReplication_monitordata
WHERE publication = 'ALL'

特定のパブリケーションでは、WHEREステートメントの「ALL」を変更します

また、このPowerShellスクリプトを使用して、システムストアドプロシージャsp_replmonitorhelppublicationからステータス列をフィルター処理できます。

Invoke-Sqlcmd -Query "USE distribution
EXEC sp_replmonitorhelppublication" -ServerInstance "TIKVICKI" | Out-File d:\temp1.txt


Get-Content d:\temp1.txt | where { $_.Contains("status : ") } | 
out-file d:\temp2.txt


(Get-Content d:\temp2.txt).replace('status ', 'Replication agents 
status') | 
Set-Content d:\Replication_Agents_Status_$(get-date -f yyyy-MM-dd-hh-mm-ss).txt

Remove-Item d:\temp1.txt -Force
Remove-Item d:\temp2.txt -Force

このスクリプトは this の記事にあります。これには、サードパーティの tool またはSSMSを使用してUIからこれを行う方法も説明されています。

Answer 3

あります 役立つストアドプロシージャ が置換ストアドプロシージャの結果 kludgy ご存じのとおり。

sp_replmonitorhelppublication null