web-dev-qa-db-ja.com

デバイスの削除時にこのudevルールがトリガーされないのはなぜですか？

私は2匹のマウスを持っていますが、1つはマウスの中央ボタンとbutton6が同時にトリガーされるという問題があります。そこで、このボタンを無効にするように~/.Xmodmapを設定しました。ただし、同時に、他のマウスでもこのボタンを使用できるようにしたいと考えました。そこで、接続されているマウスに応じてボタンのレイアウトを変更するためにudevを呼び出すxmodmapルールを作成しました。

セットアップ

これは私の現在の設定です：

/ etc/udev/rules.d/logitech-g7.rules：

# deactivate MB 6 when mouse 1 is connected
ACTION=="add", ENV{DEVTYPE}=="usb_device", ENV{ID_VENDOR_ID}=="046d", ENV{ID_MODEL_ID}=="c51a", RUN+="/home/user/.scripts/Troubleshooting/Bugfixes/mouseswitcher_wrapper 1", OWNER="user"
# restore defaults when mouse 1 is disconnected
ACTION=="remove", ENV{DEVTYPE}=="usb_device", ENV{ID_VENDOR_ID}=="046d", ENV{ID_MODEL_ID}=="c51a", RUN+="/home/user/.scripts/Troubleshooting/Bugfixes/mouseswitcher_wrapper 0", OWNER="user"

/ home/user/.scripts/Troubleshooting/Bugfixes/mouseswitcher_wrapper：

#!/bin/bash
/home/user/.scripts/Troubleshooting/Bugfixes/mouseswitcher "$1"&

/ home/user/.scripts/Troubleshooting/Bugfixes/mouseswitcher

#!/bin/bash
sleep 1
DISPLAY=":0.0"
HOME=/home/user/
XAUTHORITY=$HOME/.Xauthority
export DISPLAY XAUTHORITY HOME

if [[ "$1" == 1 ]] #differentiate between ADD (1) event and REMOVE (0) event
  then
      /usr/bin/xmodmap /home/user/.XmodmapG7 > /dev/null 2>&1
  else
      /usr/bin/xmodmap /home/user/.Xmodmap > /dev/null 2>&1
fi

これが少し複雑すぎると、udev、xmodmap、およびDISPLAY変数に関する多くの問題に遭遇したためです。私のスクリプトは this Q＆A に基づいています。

現在の状態

ADDアクションは正常に機能しますが、REMOVEアクションは機能しません。端末でいずれかのRUNコマンドを手動で実行すると正常に動作します。

これまでに試したこと

私は このフォーラムの投稿 を見つけ、udevが削除アクションに問題がある理由を概説し、それに応じてATTRSをENV変数に置き換えました。しかし、これはすべて役に立ちませんでした。REMOVEトリガーはまだ機能しません。

私が間違っていることがあるはずです。このあたりのudevとLinuxに精通している誰かが私のケースを調べてくれると本当にありがたいです。

追加情報

レシーバーを接続したときのudevadm monitor --environment --udevの出力：

######ADD#######

monitor will print the received events for:
UDEV - the event which udev sends out after rule processing

UDEV  [21728.392805] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3 (usb)
ACTION=add
BUSNUM=002
DEVNAME=/dev/bus/usb/002/037
DEVNUM=037
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3
DEVTYPE=usb_device
ID_BUS=usb
ID_MODEL=USB_Receiver
ID_MODEL_ENC=USB\x20Receiver
ID_MODEL_ID=c51a
ID_REVISION=4100
ID_SERIAL=Logitech_USB_Receiver
ID_USB_INTERFACES=:030102:030000:
ID_VENDOR=Logitech
ID_VENDOR_ENC=Logitech
ID_VENDOR_ID=046d
MAJOR=189
MINOR=164
PRODUCT=46d/c51a/4100
SEQNUM=3139
SUBSYSTEM=usb
TYPE=0/0/0
UDEV_LOG=3
UPOWER_VENDOR=Logitech, Inc.
USEC_INITIALIZED=21727880859

UDEV  [21728.393864] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0 (usb)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0
DEVTYPE=usb_interface
INTERFACE=3/1/2
MODALIAS=usb:v046DpC51Ad4100dc00dsc00dp00ic03isc01ip02in00
PRODUCT=46d/c51a/4100
SEQNUM=3140
SUBSYSTEM=usb
TYPE=0/0/0
UDEV_LOG=3
USEC_INITIALIZED=21728393779

UDEV  [21728.395536] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1 (usb)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1
DEVTYPE=usb_interface
INTERFACE=3/0/0
MODALIAS=usb:v046DpC51Ad4100dc00dsc00dp00ic03isc00ip00in01
PRODUCT=46d/c51a/4100
SEQNUM=3146
SUBSYSTEM=usb
TYPE=0/0/0
UDEV_LOG=3
USEC_INITIALIZED=21728395426

UDEV  [21728.395737] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C51A.004B (hid)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C51A.004B
HID_ID=0003:0000046D:0000C51A
HID_NAME=Logitech USB Receiver
HID_PHYS=usb-0000:00:1d.0-1.3/input0
MODALIAS=hid:b0003g0001v0000046Dp0000C51A
SEQNUM=3141
SUBSYSTEM=hid
UDEV_LOG=3
USEC_INITIALIZED=21728395467

UDEV  [21728.398102] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C51A.004C (hid)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C51A.004C
HID_ID=0003:0000046D:0000C51A
HID_NAME=Logitech USB Receiver
HID_PHYS=usb-0000:00:1d.0-1.3/input1
MODALIAS=hid:b0003g0001v0000046Dp0000C51A
SEQNUM=3147
SUBSYSTEM=hid
UDEV_LOG=3
USEC_INITIALIZED=21728397927

UDEV  [21728.398650] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C51A.004B/hidraw/hidraw2 (hidraw)
ACTION=add
DEVNAME=/dev/hidraw2
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C51A.004B/hidraw/hidraw2
MAJOR=251
MINOR=2
SEQNUM=3145
SUBSYSTEM=hidraw
UDEV_LOG=3
USEC_INITIALIZED=21728398188

UDEV  [21728.399406] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C51A.004C/hidraw/hidraw3 (hidraw)
ACTION=add
DEVNAME=/dev/hidraw3
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C51A.004C/hidraw/hidraw3
MAJOR=251
MINOR=3
SEQNUM=3151
SUBSYSTEM=hidraw
UDEV_LOG=3
USEC_INITIALIZED=21728399273

UDEV  [21728.400119] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/usbmisc/hiddev1 (usbmisc)
ACTION=add
DEVNAME=/dev/usb/hiddev1
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/usbmisc/hiddev1
MAJOR=180
MINOR=1
SEQNUM=3150
SUBSYSTEM=usbmisc
UDEV_LOG=3
USEC_INITIALIZED=21727874845

UDEV  [21728.401438] add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input73 (input)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input73
EV=17
ID_BUS=usb
ID_INPUT=1
ID_INPUT_MOUSE=1
ID_MODEL=USB_Receiver
ID_MODEL_ENC=USB\x20Receiver
ID_MODEL_ID=c51a
ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.0
ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_3_1_0
ID_REVISION=4100
ID_SERIAL=Logitech_USB_Receiver
ID_TYPE=hid
ID_USB_DRIVER=usbhid
ID_USB_INTERFACES=:030102:030000:
ID_USB_INTERFACE_NUM=00
ID_VENDOR=Logitech
ID_VENDOR_ENC=Logitech
ID_VENDOR_ID=046d
KEY=ffff0000 0 0 0 0
MODALIAS=input:b0003v046DpC51Ae0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
MSC=10
NAME="Logitech USB Receiver"
PHYS="usb-0000:00:1

レシーバーを削除したときのudevadm monitor --environment --udevの出力：

#######REMOVE#######


monitor will print the received events for:
UDEV - the event which udev sends out after rule processing

UDEV  [21800.789239] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input75/mouse1 (input)
ACTION=remove
DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-mouse
DEVNAME=/dev/input/mouse1
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input75/mouse1
ID_BUS=usb
ID_INPUT=1
ID_INPUT_MOUSE=1
ID_MODEL=USB_Receiver
ID_MODEL_ENC=USB\x20Receiver
ID_MODEL_ID=c51a
ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.0
ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_3_1_0
ID_REVISION=4100
ID_SERIAL=Logitech_USB_Receiver
ID_TYPE=hid
ID_USB_DRIVER=usbhid
ID_USB_INTERFACES=:030102:030000:
ID_USB_INTERFACE_NUM=00
ID_VENDOR=Logitech
ID_VENDOR_ENC=Logitech
ID_VENDOR_ID=046d
MAJOR=13
MINOR=33
SEQNUM=3178
SUBSYSTEM=input
UDEV_LOG=3
USEC_INITIALIZED=21797014959

UDEV  [21800.792866] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input75/event6 (input)
ACTION=remove
DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-event-mouse
DEVNAME=/dev/input/event6
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input75/event6
ID_BUS=usb
ID_INPUT=1
ID_INPUT_MOUSE=1
ID_MODEL=USB_Receiver
ID_MODEL_ENC=USB\x20Receiver
ID_MODEL_ID=c51a
ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.0
ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_3_1_0
ID_REVISION=4100
ID_SERIAL=Logitech_USB_Receiver
ID_TYPE=hid
ID_USB_DRIVER=usbhid
ID_USB_INTERFACES=:030102:030000:
ID_USB_INTERFACE_NUM=00
ID_VENDOR=Logitech
ID_VENDOR_ENC=Logitech
ID_VENDOR_ID=046d
MAJOR=13
MINOR=70
SEQNUM=3179
SUBSYSTEM=input
UDEV_LOG=3
USEC_INITIALIZED=21797013896

UDEV  [21800.797061] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input75 (input)
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input75
EV=17
ID_BUS=usb
ID_INPUT=1
ID_INPUT_MOUSE=1
ID_MODEL=USB_Receiver
ID_MODEL_ENC=USB\x20Receiver
ID_MODEL_ID=c51a
ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.0
ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_3_1_0
ID_REVISION=4100
ID_SERIAL=Logitech_USB_Receiver
ID_TYPE=hid
ID_USB_DRIVER=usbhid
ID_USB_INTERFACES=:030102:030000:
ID_USB_INTERFACE_NUM=00
ID_VENDOR=Logitech
ID_VENDOR_ENC=Logitech
ID_VENDOR_ID=046d
KEY=ffff0000 0 0 0 0 0 0 0 0
MODALIAS=input:b0003v046DpC51Ae0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
MSC=10
NAME="Logitech USB Receiver"
PHYS="usb-0000:00:1d.0-1.3/input0"
PRODUCT=3/46d/c51a/111
PROP=0
REL=143
SEQNUM=3180
SUBSYSTEM=input
UDEV_LOG=3
UNIQ=""
USEC_INITIALIZED=21796479085

UDEV  [21800.797132] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C51A.004D/hidraw/hidraw2 (hidraw)
ACTION=remove
DEVNAME=/dev/hidraw2
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C51A.004D/hidraw/hidraw2
MAJOR=251
MINOR=2
SEQNUM=3181
SUBSYSTEM=hidraw
UDEV_LOG=3
USEC_INITIALIZED=21800796369

UDEV  [21800.797172] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C51A.004D (hid)
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C51A.004D
HID_ID=0003:0000046D:0000C51A
HID_NAME=Logitech USB Receiver
HID_PHYS=usb-0000:00:1d.0-1.3/input0
MODALIAS=hid:b0003g0001v0000046Dp0000C51A
SEQNUM=3182
SUBSYSTEM=hid
UDEV_LOG=3
USEC_INITIALIZED=21800796501

UDEV  [21800.798537] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0 (usb)
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0
DEVTYPE=usb_interface
INTERFACE=3/1/2
MODALIAS=usb:v046DpC51Ad4100dc00dsc00dp00ic03isc01ip02in00
PRODUCT=46d/c51a/4100
SEQNUM=3183
SUBSYSTEM=usb
TYPE=0/0/0
UDEV_LOG=3
USEC_INITIALIZED=21800796538

UDEV  [21800.814181] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input76/event7 (input)
ACTION=remove
DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-if01 /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.1-event
DEVNAME=/dev/input/event7
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input76/event7
ID_BUS=usb
ID_INPUT=1
ID_INPUT_KEY=1
ID_MODEL=USB_Receiver
ID_MODEL_ENC=USB\x20Receiver
ID_MODEL_ID=c51a
ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.1
ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_3_1_1
ID_REVISION=4100
ID_SERIAL=Logitech_USB_Receiver
ID_TYPE=hid
ID_USB_DRIVER=usbhid
ID_USB_INTERFACES=:030102:030000:
ID_USB_INTERFACE_NUM=01
ID_VENDOR=Logitech
ID_VENDOR_ENC=Logitech
ID_VENDOR_ID=046d
MAJOR=13
MINOR=71
SEQNUM=3184
SUBSYSTEM=input
UDEV_LOG=3
USEC_INITIALIZED=21797013933
XKBLAYOUT=de
XKBMODEL=pc105

UDEV  [21800.816765] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input76 (input)
ABS=1 0
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input76
EV=1f
ID_BUS=usb
ID_INPUT=1
ID_INPUT_KEY=1
ID_MODEL=USB_Receiver
ID_MODEL_ENC=USB\x20Receiver
ID_MODEL_ID=c51a
ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.1
ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_3_1_1
ID_REVISION=4100
ID_SERIAL=Logitech_USB_Receiver
ID_TYPE=hid
ID_USB_DRIVER=usbhid
ID_USB_INTERFACES=:030102:030000:
ID_USB_INTERFACE_NUM=01
ID_VENDOR=Logitech
ID_VENDOR_ENC=Logitech
ID_VENDOR_ID=046d
KEY=4837fff 72ff32d bf544446 0 0 1 20f90 8b17c000 677bfa d9415fed 9ed680 4400 0 10000002
MODALIAS=input:b0003v046DpC51Ae0111-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B5,B6,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E4,E7,E8,E9,EA,EB,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw
MSC=10
NAME="Logitech USB Receiver"
PHYS="usb-0000:00:1d.0-1.3/input1"
PRODUCT=3/46d/c51a/111
PROP=0
REL=40
SEQNUM=3185
SUBSYSTEM=input
UDEV_LOG=3
UNIQ=""
USEC_INITIALIZED=21796482192

UDEV  [21800.817249] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/usbmisc/hiddev1 (usbmisc)
ACTION=remove
DEVNAME=/dev/usb/hiddev1
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/usbmisc/hiddev1
MAJOR=180
MINOR=1
SEQNUM=3186
SUBSYSTEM=usbmisc
UDEV_LOG=3
USEC_INITIALIZED=21800816392

UDEV  [21800.818490] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C51A.004E/hidraw/hidraw3 (hidraw)
ACTION=remove
DEVNAME=/dev/hidraw3
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C51A.004E/hidraw/hidraw3
MAJOR=251
MINOR=3
SEQNUM=3187
SUBSYSTEM=hidraw
UDEV_LOG=3
USEC_INITIALIZED=21800816472

UDEV  [21800.818536] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C51A.004E (hid)
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C51A.004E
HID_ID=0003:0000046D:0000C51A
HID_NAME=Logitech USB Receiver
HID_PHYS=usb-0000:00:1d.0-1.3/input1
MODALIAS=hid:b0003g0001v0000046Dp0000C51A
SEQNUM=3188
SUBSYSTEM=hid
UDEV_LOG=3
USEC_INITIALIZED=21800816908

UDEV  [21800.818580] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1 (usb)
ACTION=remove
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1
DEVTYPE=usb_interface
INTERFACE=3/0/0
MODALIAS=usb:v046DpC51Ad4100dc00dsc00dp00ic03isc00ip00in01
PRODUCT=46d/c51a/4100
SEQNUM=3189
SUBSYSTEM=usb
TYPE=0/0/0
UDEV_LOG=3
USEC_INITIALIZED=21800816945

UDEV  [21800.818645] remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3 (usb)
ACTION=remove
BUSNUM=002
DEVNAME=/dev/bus/usb/002/038
DEVNUM=038
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3
DEVTYPE=usb_device
ID_BUS=usb
ID_MODEL=USB_Receiver
ID_MODEL_ENC=USB\x20Receiver
ID_MODEL_ID=c51a
ID_REVISION=4100
ID_SERIAL=Logitech_USB_Receiver
ID_USB_INTERFACES=:030102:030000:
ID_VENDOR=Logitech
ID_VENDOR_ENC=Logitech
ID_VENDOR_ID=046d
MAJOR=189
MINOR=165
PRODUCT=46d/c51a/4100
SEQNUM=3190
SUBSYSTEM=usb
TYPE=0/0/0
UDEV_LOG=3
UPOWER_VENDOR=Logitech, Inc.
USEC_INITIALIZED=21796488421
usbmouseudevxmodmap
12
Glutanimate

以前の回答が書かれてから数年になります。それ以来、udevが変更されて、少なくともudevパッケージバージョン237-3ubuntu10.29を備えたUbuntu 18.04では、udevソリューションが機能しなくなったようです。この問題に関する他の報告は見つけられなかったので、この問題を将来この問題に遭遇する人々のために掲載します。

このバージョンのudevでは、ENV{ID_VENDOR_ID}ENV{ID_MODEL_ID}は削除イベントに設定されていないため、ルールがこれらの変数に一致することはありません。回避策は、追加イベントと削除イベントの両方に設定されているENV{PRODUCT}を使用することです。 ENV{PRODUCT}の形式はidVendor/idProduct/bcdDeviceであるため、以下を含むルールと照合できます。

ENV{PRODUCT}=="xxxx/yyyy*"

ここで、xxxxはベンダーID、yyyyはデバイスの製品IDです。

前回の回答時と比較した副次的な注意点は、udevがENV{DEVTYPE}を正しく設定するようになり、ルールで照合できることです。

2
echo